Recent content by Pilot1

HP has a slew of bad power supplies out there. Check with HP to see if your's are involved. It might be possible that you have two marginal power supplies, so when you pulled one, the other could not handle the load, so the result is an unexpected shutdown. I work in a data center where we have...

It sounds like your KVM is highly suspect (bad). I work in a data center where we have numerous Blade Centers. We have had to replace many KVM's because of defects. IBM investigating. Also beware of firmware on KVM's, just like everything else that IBM makes, it's firware can be downloaded...

Looks clean, this server is the Symantec Enterprise virus console, and server. Good idea, will keep an eye out.

I have a very strange problem. I recently upgraded our old W2K servers to W2003. We have had a Lan to Lan Cisco VPN tunnel between the two servers for a couple of years now. I have been noticing that when the network is interrupted, or the server is rebooted, it starts to send a HUGE amount...

Yes, export the accounts to a csv by going to Accounts, Exporting, export accounts to a comma delimited file. Then you can use whatever application you want to format it into a nice looking document - Excel, Access, etc.

disable inspect esmtp

Wish I had an answer. It seems to be Pix specific. I have 10 units. Some work, some don't. Suspect some new Java security update conflicts with the PDM.

What static mapping statements would I use to get traffic for certain ports to get down tunnel to remote site. I am using PIX 501 at head end. I have a Mail and Web server at remote end behind an 831 Router. There is nothing connected to the inside interface of the pix physically. I tried to...

Here is Pix running config PIX Version 6.3(5) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password EfgmpnlVN5qxMgKN encrypted passwd EfgmpnlVN5qxMgKN encrypted hostname pix.keithmarx.local domain-name...

I have a Pix 501 set up at work. Right now nothing is connected to the inside interface at all. I have a test web and mail server at home. I am using a Cisco 831 router at home, and have an established tunnel to the pix. I want to be able to map ports 25 and 80 to the web and mail server at...

Let me interject one more thought. Smart Net is a great way to overcome gaps in your knowledge, and is reasonbly priced for the value you get from Cisco. Free Plug for Cisco I guess!!

I had the same problem running SCO Telenet sessions over VPN's to all remote branch offices. As we hacked out the problem we found out in the logs (PIX 501 at headend) that the SCO server host(5.0.6) was closing the connections because of the idle periods at the remote end e.g. user going to...

You can do this easily, promote the new server using DCPROMO. Shut down old Domain Controller and disconnect permanently. You must then use the NDSUTIL utility to promote the Master Domain Controller Roles to the new server. There are around 5 roles to assign.

This is correct operation. What is happening is the firewall that you are behind will deny this traffic. If this is the default web site on the server use this address to edit and view web site. Example http://whatever hostname of server is. If it is not default web site, an alias name must...

I did upgrade on Mdaemon recently to 8.3.3 Now Minolta Di251 and Di351 will not complete smtp transaction to local network. Previous versions work. All local private ip networks. EHLO is the last logged event, and then it stalls and times out.. Anyone seen this? These are copiers on local...