Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by phonenoob

  1. phonenoob

    Problem backing up PBX over xmodem

    Went to lunch and indeed it did. Sure took it long enough! Yes it was an option 11 by the way. Thanks!
  2. phonenoob

    Problem backing up PBX over xmodem

    So in my infinite wisdom, I decide to try to backup our PBX over xmodem: ld 143 xbk <cr> <cr> R> At this point I tell Minicom to accept a file via xmodem, and Minicom says there was a failure executing this protocol. Great. Now I can't access my switch cause presumably it's sitting there...
  3. phonenoob

    Seeking international call suggestions

    John, Ok yes, that was pretty much over my head. I have thus far stuck with move/add/changes so I'm not sure what ncos or rlb is. Think you could post the code and/or explain this in simpler terms for me? Thanks
  4. phonenoob

    Phone Disabled?

    Thank you for the information. Stating showed that it was ok, so I tested it in the wiring closet. Must have freaked out for some reason, but it works ok now.
  5. phonenoob

    Seeking international call suggestions

    I have a user who is trying to make an international call but cannot. I don't want to open up everyone in our office to make international calls for obvious reasons. What I'd ideally like is some access code that someone (maybe a manager) would have to enter to dial internationally. How do other...
  6. phonenoob

    Phone Disabled?

    Last week before going on vacation I setup a handset for someone and all worked well. When I came back I got an email from her saying she was out of the office for a few days, came back and it isn't working anymore. I have confirmed the wiring and that the handset hasn't gone bad, and the PBX...
  7. phonenoob

    CFW revert

    Using my example, TN 12 14 is the phone forwarded to (aka 2222) REQ: prt TYPE: 2616 TN 12 14...
  8. phonenoob

    CFW revert

    I assume you would remove it by doing a CLS SFD? If so, I just tried all combinations of SFA/SFD on 1111 and 2222. No change :(
  9. phonenoob

    CFW revert

    Erm. Disregard that last post. Here's what I meant: I added CLS SFA to both phones and unanswered calls to 1111 still go to 1111's voicemail box. I want them to go to 2222's. Am I missing something?
  10. phonenoob

    CFW revert

    Hrm. I added CLS SFA to both phones and unanswered calls to 1111 still go to 2222's voicemail box. Am I missing something?
  11. phonenoob

    CFW revert

    Sorry, I meant to include that in the post. This is Merlin Mail
  12. phonenoob

    CFW revert

    Here's the example I'd like to work with: 1) User at DN 1111 CFWs to 2222 2) Caller rings 1111 which forwards properly 3) User at 2222 does not answer the phone 4) Caller is sent to 1111's voicemail box When someone forwards their phone to someone else and the call goes unanswered, I want it...
  13. phonenoob

    External call forward security

    I'm in the Atlanta area, so I can't limit CFW 8; it would have to be 11, as we have 3 area codes that are local (404, 678 and 770). Even if I could limit CFW to only those area codes, that would be better than nothing. I don't follow exactly how I would affect NCOS on the trunk or the set. I...
  14. phonenoob

    External call forward security

    After reading some old posts, I found out how to set CLS CFXA and the CFW key length to 11 to allow someone to forward to an external cellphone while they are gone. I understand that there are obvious security risks to this like having the person CFW their DN to South America or something...
  15. phonenoob

    Search for DN by name

    How can you search for a DN by a persons name?
See more

Part and Inventory Search

Back
Top