Recent content by phonedoc

getting this error on 5.50j cs1000E on boot up. 0x206ef948 (tRptD): (2/8/12 19:02:17.053) BERR704 EXC 0: Bus Error in ISR SR=0x2700, PC=0x1111de6a, Addr=0xb000c140, SSW=0x105 0x206ef948 (tRptD): (2/8/12 19:02:17.057) BERR704 EXC 0: Bus Error in ISR SR=0x2700, PC=0x1111de6a...

for what release? The ip addresses need to be in the same range as the CLAN or the ELAN

please see PB-2004-181

CallPilot Fact: 4.0 Fact: Application Builder Fact: CP404S01G08A Fact: Windows XP Symptom: Unable to log into Application builder. Symptom: Cannot retrieve LDAP com class ID. Symptom: Cannot Self-Register. Symptom: Creating LDAP Bean object Symptom: LDAP port 389 is responding. Symptom...

make sure in COS that you select directory allowed

make sure your are using the latest client from the nortel website and that your IP address is the correct one for the server

CallPilot Fact: CallPilot 4.0 Symptom: Getting error when opening user detail page. Symptom: Error: "Unable to connect time zone AOS COM object to the CallPilot server. -2147467262#(null)" Fix: Re-install CallPilot server software from Application CD per CallPilot 4.0 DTR.

should be using 6250 tapes to get it all on there.

??\c:\WINDOWS\System32\driversipi2ifs19.sys - error status was 0xc000012f Anyone know how to fix it?

if you are talking about the admin password for the mail system you will need to reset it from the install/data tape.

depending on what release you are on there are patches for the AUD335 errors on Nortels website. check LD 34 for testing DTR and LD 38 for testing conf.

he might be talking about a keycode to add access ports.

Sounds like a bad SSC card

does the DSS-9000 have power? If so an INI will be needed to reset it in the PBX.

Sounds like you may have some bad blocks on the hard drive that need to be reassigned to see if you can get a completed back.