Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by phillip.bcs

  1. phillip.bcs

    IP Office Multi Campus PA broadcast

    We seem to have conflicting information. Three of my Telecenter units have a phone connection that act as an analog trunk port or phone line. I have this connected to my IPO as an analog trunk and have it assigned a line number. Because it has a line number, I can direct any call through that...
  2. phillip.bcs

    IP Office Multi Campus PA broadcast

    Hello, rdoubrava. I'm guessing you mean "Collective" as the ring mode because there is not "ring all" option. My choices are Collective, Collective Call Waiting, Sequential, Rotary and Longest Waiting From the help file and my experimentation, once a call is picked up, the system stops trying...
  3. phillip.bcs

    IP Office Multi Campus PA broadcast

    Greetings, I feel I need to clarify a few things. Firstly, we already have a working solution for connecting the phone system to the PA in each building individually. It works well and we have no issues there. Secondly, the point of this project is to see if we can accomplish the end goal...
  4. phillip.bcs

    IP Office Multi Campus PA broadcast

    Thank you for the replies so far. IPGuru Your solution makes the most practical sense, however I overlooked something in my thought process. I can easily setup "dummy" extensions and have done so in my tests. Each "dummy" extension is configured for twinning and to dial the local short code for...
  5. phillip.bcs

    IP Office Multi Campus PA broadcast

    Background: We have four campuses each running the Avaya IP Office 500v2 with 9.0.700... Each campus runs on its own network and the communication between the systems works perfectly. At each campus, I have a Rauland Telecenter connected to the IPO using an analog trunk that provides dial tone...
  6. phillip.bcs

    Third Party SIP Server connected to Avaya IP Office

    Specifically, it relates to incoming DIDs. I was taught (and it makes sense to me) that it is better to put each number in fully so you can easily make changes, detect issues, put in temporary redirects, etc. It was my mistake to take that to mean you should not use them at all.
  7. phillip.bcs

    Third Party SIP Server connected to Avaya IP Office

    holdmusic34, Thank you! I was told that putting wildcards in ICRs was bad practice. I definitely agree when working with incoming calls, but when it's between two internal systems, I figured there had to be a better way. Your suggestion put me on the right track. You cannot use 20N as a...
  8. phillip.bcs

    Third Party SIP Server connected to Avaya IP Office

    You are correct. I posted the wrong trace. Sorry about that. That is the keepalive being sent over the trunk. Below is the correct trace: 10207584mS SIP Rx: UDP 10.20.240.8:5060 -> 10.20.245.1:5060 INVITE sip:20211@10.20.245.1 SIP/2.0 Via: SIP/2.0/UDP...
  9. phillip.bcs

    Third Party SIP Server connected to Avaya IP Office

    Greetings! I have an Avaya IP Office 500 V2 running 9.0700.... I'm also running a Brekeke SIP server with a SIP soft phone registered. I have no problems calling the soft phone, but I cannot call from the soft phone any of the Avaya extensions. I can make it work, however, if I setup an ICR on...
See more

Part and Inventory Search

Back
Top