Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by pgilli
-
RS/6000 Diagnostic LED numbers and codes
Hi, I have 2 old AIX server (oslevel 4.3.3.0) with boot problem The 1st hang during boot, with code "632" on led display. The 2nd hang during boot, with code "bed" on led display. I'm searching information for these code. How to solve the problem? Please, can you help me? Thankyou Paolo -
hacmp ghost disks and lost vg
Hi everybody, please, are there any ideas/suggestions to manage and solve my problem? Regards Paolo -
hacmp ghost disks and lost vg
Hi Mike no rows returned by odmget command: pero2 [/]: # odmget CuAt | grep -p hvxvg pero2 [/]: # On active node this is the output: pero1 [/]: odmget CuAt | grep -p hvxvg CuAt: name = "hvxvg" attribute = "vgserial_id" value = "00202554d56ad3d4" type = "R"... -
hacmp ghost disks and lost vg
HI. DSMARWAY, node2 is stby server, the cluster is locate in a remote site and I suppose the 2 node started at the same time when electrical power was up. I ran cfgmgr on node2 and also rebooted it. in both case, the situation is not varied: pero2 [/]: # lsdev -Ccdisk hdisk0 Available... -
hacmp ghost disks and lost vg
Hi Khalid, I thought the solution you provided, but have some doubts cause the mirror of hacmp shered vg is done using one disk on node1 and one disk on node2. On node1, hvxvg on local disk hdisk2 is mirrored on hdisk4 on node2 (or viceversa, I don't know as identify local and remote disk)... -
hacmp ghost disks and lost vg
additional info: CLINFO Version 4.2. oslevel 4.3.3.0 -
hacmp ghost disks and lost vg
Hi, cause loss of power, node1 and node2 of hacmp cluster have some problems with disks and vg. NODE1 there is a ghost disk: hdisk6 (Defined) has the same address of hdisk2 (Availiable) pero1 [/]: lsdev -Ccdisk hdisk0 Available 04-C0-00-0,0 Bull 2.1 GB 16 Bit SCSI Disk Drive. hdisk1...
