Recent content by Petazetas754

Yes i have my isdn line and bri active and configurated, But when i try to configurate the ports of isdn bri s/t, i cant because 1760 router only let me configurate voice ports that are FXO and FXS.... More ideas...

Hi I have a 1760 Router a 6 iphones (2port FXO,ISDN BRI,FXS) and Callmanager Express 3.0 I want a voice call from ISDN BRI S/T to be routed to one iphone for example the one with number 006" Please ,can you explain with a little EXAMPLE the theme of put my isdn number "942291236" with my...

My problem is: I can make calls to the pstn but i cant recieve calls from pstn (all local calls works perfect) I tried putting Connection plar command in fxo vic but it doesnt works. Have i the telephone numbers right? Where must i put the number where i want calls in (for example telephone...

Thanks a lot ,Im going to try your advices and tell you if they work

Here is my network for facility the solution: ip phones to the switch (numbers to call between them) 001...

Here is my network for facility the solution: ip phones to the switch (numbers to call between them) 001...

Have I the extensions correctly configurated? Extension are the same as 001 002 003 ...? thank you

Do you think im using extension or confusing with id numbers.... Do you recommend me a dial plan map?

Without opx doesnt works also connction plar 005 connection plar opx 005 Both dont work

Now port FXO 2/0 has this configuration IN OUT PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC ========= == ============ ===== ==== ======== ======== == 2/0 -- fxo-ls up dorm idle on-hook y 2/1 -- fxo-ls up...

I have put connection plar but not works. Whta is exactly the command i must write connection plar 005? I want that the PSTN only rings in telephon with number 005 and when i press 9 in some ip telephon its goes to PSTN Have i the dial peers correctly? Can you supervisory my numbers and my...

Thanks a lot all .Ill try that command, and tell you if works. This is a very good technnical forum,its great, and fast....

Hi, sorry for my English but im spanish,I have a Cisco Router 1760 and six ip-phones 7905, 1 FXO with 2 ports and 1 FXS 2 ports too. I have all connected and i can make calls to the pstn and to my ip phones (local calls) but i cant recieve incoming calls...thats its my problem, I tried lot of...

oh it doesnt works here is my coplete configuration has i write correctly dial peers: ¿incoming called-number 005? CONFIGURACION GLOBAL ROUTER Using 2408 out of 29688 bytes ! ! Last configuration change at 20:43:17 GMT Sat Aug 21 2004 ! NVRAM config last updated at 20:43:20 GMT Sat Aug 21...

Thanks BuckWeet now i going put that in my configuration a will see if works. Thanks a lot for your help!!!!!!! :)