Recent content by PEMpal

Check out Global Knowledge. http://www.globalknowledge.com/training/course.asp?pageid=9&courseid=11392&catid=491&country=United+Stateshttp://www.globalknowledge.com/training/course.asp?pageid=9&courseid=11392&catid=491&country=United+States

If the phone is NOT a speakerphone, you can get Key 06 back by changing HFA to HFD. On an M2008 phone, look for a 1/4" wide, rectangular opening along the front edge of the phone, just below the mouthpiece rest of the phone base (hard to describe where to look!). That opening is the microphone...

http://www.tek-tips.com/viewthread.cfm?qid=1452800&page=1

local administrator on the OTM PC and local admin password

You might want to look at Delayed Ringing (DNDR) on the Director's phone. DNDR uses seconds, not number of rings. In other words, his phone will be blinking on the SCN line for x number of seconds before it actually starts ringing. You'll have to play with different numbers of seconds.

Check out algosolutions.com for their 8001 IP Alerter device.http://www.algosolutions.com/products/visual-audible-alerting/8001-IP-Alerter/index.html

Should be a space between CPY and 1.

Step by step: 1. If MAT is open, close it. Changing the password can be done from an already open MAT, but my instructions are easier starting from the top! 2. Start MAT !! 3. Click the + to the left of your Site Name 4. Right click the System Name and left click {Properties} 5. Click the...

Disclaimer: I do not work for either of the following companies, nor for the equipment manufacturers identified! Check out: http://www.payphone.com/shop/customer/product.php?productid=16475 If the phones are digital sets, you would need to create analog ports with the same DN. Also, check out...

I think it's a bad set. period. i tried swapping handset (no luck) and handset cord (no luck). Time to call my provider for a replacemnet phone. Thanks!

User has M3904 phone. Whenever phone rings, he picks up the handset to talk. The caller's voice starts coming out of the speaker in the BASE of the M3904. How do I make that stop, permanently? My guess is that it's just a defective phone. I have replaced his M3904 with a spare and there's no...

You're welcome! I'm glad to contribute something ... finally!

Use LD 21 to see what values are currently stored in CFN0, CFN1, etc: LD 21 PT1000 REQ: prt TYPE: rdr TYPE RDR_DATA CUST 0 TYPE RDR_DATA CUST 00 OPT CFO CFRD PVCD CWRD FNAD FDN FNAT FDN FNAL FDN CFTA YES CCFWDN CFN0 4 CFN1 2 CFN2 1 DFN0 4 DFN1 2 DFN2 1 MDID YES NDID YES MWFB YES In...

I don't recommend posting the ENTIRE NPA ALL list here! At most of my sites in the US and Europe, the NPA list is 60 - 80 PAGES long!! Also, I have an NPA for a three digit NPA at the end of my list: NPA 1989 RLI 12 SDRR NONE ITEI NONE NPA 215 RLI 17 SDRR NONE ITEI NONE I don't know...

I also have a very related question, one I went around and around with Verizon, AT&T and Sprint over a year ago. I finally GAVE UP! I do not have PRI. I have several COTs and WATs lines (remember those?). Any outbound call from my site to someone with caller ID gets a display showing the number...