Recent content by pddxr

Do you have a model number for the pc or mobo? This would help in finding the exact way to access the bios.

hmm.. doesn't sound good.. Assuming first that the drive is not the problem. I'd try a new ribbon Check the jumper settings Make sure that the bois is set properly for your configuration Make sure that your version of the motherboard bios supports a drive that big I actually had a 80gig drive...

sounds like your hdd may be bad. Try running scandisk or downloading a hdd test from samsung.

With my experience dual booting XP Pro with redhat 9. I would recommend the following config: hard drive 1 partition 1(primary master): Redhat 9 - 5+ gigs for full install(ext3 partition mounting to /) hard drive 1 partition 2(primary master): Swap file for Redhat 9 - twice the size of ram...

All I can say is check the ribbon and the jumpers. I had a similar problem with a drive I hadn't used in a while that was set for cable select (which I never use) on the same ribbon as a master hdd. You can also try it on it's on a different IDE channel.

Sounds like the harddrive you put in was partitioned into 2 drive letters by someone before you got it. This should not be a problem but more of an inconvenience if you want all of the space to be C and not C and D. See if any of the drivers on this page work for your sound card...

I would be very curious to see a plan on how that would work.

If it's a standard ATX power supply touch the green wire to a black one

In my situation I have exchange 5.5 on 2kserver and OWA on 2kpro. In order to get OWA to work at all I had to install the latest service pack from Microsoft. I never check the administrator acount even before the service pack. http://www.microsoft.com/exchange/downloads/55/sp4dl_en.asp I...

(Win2K) administrative tools -> local security policy -> local policies -> user rights assignment. these users must be in a group that has the effective setting to log on locally

do they have access to logon locally? that may be your problem

all users that you want to have access to OWA must have local accounts on the OWA machine

Can you delete it in Safe Mode?

good deal

The drive needs to be set at a different ID number than the other drive and the SCSI card itself. What kind of SCSI is/are the drives? Does the cable have a terminator on it? If it does not then the last drive on the cable should be terminated and the one in the middle should not be