Recent content by pcgurugary

try http://www.az-software.co.uk/e_Novell.html

TheLad, Thanks! That's exactly what I was looking for.

Thanks. That's one place I did look. Does this mean that if a patch has been installed, a comment is automatically placed in autoexec.ncf by the patch process? To avoid confusion, in NW5.x, the command at the console prompt to view/edit NCF files(among many other things) is nwconfig, not install.

Make sure the server is in the same context as the newly added licenses and that you assign the licenses to the correct server. This can be done in NWadmn32. Regards, Gary

Go to www.cdw.com. I just purchased Netware 5.1 upgrade licenses from them. Regards, Gary

If your network is fairly small, you can generate the PC's MAC address by typing the following at the DOS prompt(MAC is NIC dependent, not user dependent): example: f:\nlist user=butkus /a This will give you the address node and the MAC address(node). You can then redirect the results to...

What is the best way to determine the patch level of a Netware 4.x and 5.x OS?

I have a Proliant 1600 and an ML350 Compaq server, the Proliant being older & slower as well as the main server at our company. The ML350 was purchased to run our accounting software, which was recently replaced with a much smaller package that does not need the performance requirements of its...

You just added the workstation?  Verify that you are using the latest netware client.  I found that the 3.10 client works well w/ compaq.  If you haven't tried this version you might want to.  Make sure you use the current netware client uninstall program...

Try including the following 3 lines in config.sys:<br><br>device=a:\himem.sys<br>device=a:\emm386.exe<br>dos=high,umb<br><br>Several assumptions here. Config.sys & autoexec.bat, Himem.sys & emm386.exe reside on the bootable floppy in the root.&nbsp;&nbsp;Also, that earlier versions of these...