Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by PBXgeek

  1. PBXgeek

    Virtual Phone Set

    In LD 15 under RDR_Data the prompts cfn0, cfn1 & cfn2 are defaulted to 4 rings for call foward no answer. If the phantom phone is hard call forwarded then the caller will go to call pilot. If not it should follow FDN for ring no answer. Set the phone for CLS = FNA and RCO (ring cycle option)...
  2. PBXgeek

    IP addresses

    No check out this web site http://www.learntosubnet.com/ It may help to understand how this is accomplished.
  3. PBXgeek

    FCAS tables

    BARS is found in the Networking documentation of the NTPs. Be very sure of your changes made in NARS/BARS as you can elliminate your users ability to access the network.
  4. PBXgeek

    Advice on GlobalKnowledge Classes please?

    0200c or FAM is the overal familiarization class then 0300c for large systems database administration. If you are going to be responsible for hardware maintenance, 0263c is a 2week hands on course which covers the option 61c - 81c (Great Class!). If you can install the 81c, opt 11 will be very...
  5. PBXgeek

    routs in RLI

    Typically individual entries would be associated with different FRL (restriction levels) as associated with a given NCOS. As an example, Entry 0 might give access to route "x" for users with an NCOS of 3 while Entry 1 could provide access to the same route for users with a NCOS level...
  6. PBXgeek

    restore from mics 6 to mics 6.1

    In order to perform this upgrade and keep programming, you will need to order the upgrade tool from Nortel. This will be good for any system upgrade from 6.0 to 6.1
See more

Part and Inventory Search

Back
Top