Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by pbxadmin124

  1. pbxadmin124

    9630 G Issue

    I just purchased some 9630G phones. I am running CM 5.2.1 my Clans are TN799 DP HW00 FW040. My DHCP Avaya Options are set to: MCIPADD=172.16.200.21,MCPORT=1719,TFTPSRVR=172.16.144.135,L2QVLAN=60,VLANTEST=0 After i program the extension the phone works great. After about 10 minuted of...
  2. pbxadmin124

    E1 Q-sig to T1 Q-sig no MWI

    Problem Solved... When the T1 card was installed, the MAS loaded an incorrect driver. It loaded the driver for the 2T1 instead of the driver for the 1T1. I removed the Dialogic driver and installed the driver that was on the MAS installation disk. Configured the card and started it an Pow!!! all...
  3. pbxadmin124

    E1 Q-sig to T1 Q-sig no MWI

    Due to a hardware failure I had to replace my Dialogic boards. Went from E1 Q-sig to T1 Q-sig. Everything is functioning as should, however I can't seem to get my MWI to work... Any ideas???
  4. pbxadmin124

    MM 4.0 Web Subscriber Options Issue

    When I log into the MM Web Client and select options then web subscriber options I get the following error: Server Error in '/' Application. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily...
  5. pbxadmin124

    Server Upgrade

    I am currently running CM 1.3 on duplicated S8700 series servers. I have ordered new servers S8730's with CM 5.0. Is it possible to export a config file from 1.3 and import it into 5.0 or must the new servers be configured from scratch. Any help on this would be greatly appreciated.
  6. pbxadmin124

    Feature Button Help Needed Who Is The Master?

    I have just completed upgrading ISPI,CLAN, and MEDPRO firmware on 17 port networks. I have 2 remaining that are functioning but when I enable filesystem I can't connect via ftp...I can ping them... anybody have any Ideas???
  7. pbxadmin124

    Warning: Unsupported OS/Browser combination.

    I am running MM 3.0. When I log into the MM Web Client/Options/Web Subscriber Options I get the following error (Warning: Unsupported OS/Browser combination) It worked fine for several months. I see there is a patch for this for MM 3.1. Does anyone know of a patch that will work on MM 3.0 ?
  8. pbxadmin124

    Caller Application Lag

    Thanks anyway...I have to give Avaya a call
  9. pbxadmin124

    Caller Application Lag

    Any chance I can call you???
  10. pbxadmin124

    Caller Application Lag

    MM 3.0 S8700 39999- Message Desk 5 Digits Should I be tranfering to MM access number instead???
  11. pbxadmin124

    Caller Application Lag

    I deployed a caller application and am experiencing a 10 to 15 second lag before the transfer takes place... the application is set up as follows. Menu option 1 (transfer to extension)Message Desk Menu option 2 (transfer to extension)Receptionist Menu option 3 (transfer to callerapp)Weather...
  12. pbxadmin124

    Caller Apps

    I currently am using Vectoring to route calls. We want to eliminate the vectors and have Caller apps handle the requests. This is all new to me. I upgraded from Intuity to the Modular Messaging Server last Friday. All is well so far. I am just trying to figure out how to mirror the vectors with...
  13. pbxadmin124

    Caller Apps

    Hi Ken, I want callers to be able to enter any 5 digit extension on the system. This would be a transfer to extension correct? If so is there a wildcard for the transfer?
  14. pbxadmin124

    Caller Apps

    Yes
  15. pbxadmin124

    Caller Apps

    Is ther a way to set up a caller app that prompts the user to enter a 5 digit extension???
See more

Part and Inventory Search

Back
Top