Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by pauldune

  1. pauldune

    ARCserve 6.6 won't start

    Have you tried to reinstall the latest servicepack of novell?Probably its gonna repair the novell system-files. Normally you need to have the scsidriver and nwaspi loaded. Gtx Paul
  2. pauldune

    Arcserve restore through nwagent very slow

    Sorry, the arcserve version is NT 6.61, with all service packs applied. Pauldune
  3. pauldune

    Arcserve restore through nwagent very slow

    I have a nt4 server and a novell 5.1 server. In the nt4 server there is an exabyte 20/40GB tapestreamer.I'm backing up the Novell server through the NWAGENT.For this i'm using a separate ethernetcard only for backup/restore in both servers connected with a 100MB 3com switch(3300) Protocol=tcp/ip...
  4. pauldune

    Major Problems!!!(urjent please!!)

    I dont want to scare you, but mostly the vfat problem is not good solvable. So probably you are gonna have to take your data of the drive wile you can, and then reinstall. If you are gonna reinstall, use fdisk to remove the partition, and then after rebooting create a new one. In this way you...
  5. pauldune

    Can't Load Drivers for Compaq 35/70 GB DLT

    Hello, I had a similar problem.It turned out that the scsi controller to which the dlt was attached wasnt installed in NT. I installed it and now it was able to find the DLT. gtx Paul
  6. pauldune

    Connect two drive cages to a SCSI single channel

    I think your problem can be solved. The problem is probably that both the cages are terminated. On an other proliant i had a similar problem, and the only thing i had to do is take of a little pcb and than connect cage 1 to cage 2 with a supplied cable. The answer to this problem was on the...
  7. pauldune

    Windows display too few colors. Can't get it to set at 16-bit

    Looks like the wrong videodriver is installed. On the compaq site (www.compaq.com) you should be able to find them. gtx Paul
  8. pauldune

    Setting up RAID 5 using Compaq Smart Start

    Hello, The logical drive is a virtual drive wich consists of the 5 drives together.The 'combining'of the drives is done in the hardware of the raidcontroller, and the raidcontroller reports to the operating system only the logical drive. So this is normal. You could consider using a hot...
  9. pauldune

    hardisk clone.

    Hello, Well, there are a few possible answers..... 1.Install 1 PC as a win2000 advanced server. This server has the possibility of RIS (remote installation services). Now you can install one of the pc's till it is perfect for your needs.After that hook it up to the server, and with a command...
  10. pauldune

    Arcserve 2000 Agents Slow as a Turtle

    Well.... Have you tried putting your connections to half duplex? It sounds strange, but i heard a lot about this and it seems to work.... gtx Paul
  11. pauldune

    ArcServe 2000 and Netware Agent

    Hello, I dont know exactly, but there is a program called 'cron'. I think you can use it to start and stop nlm's at a specified time... gtx, Paul
See more

Part and Inventory Search

Back
Top