Recent content by parazhang

Hi,guys: I can access win shared folder by \\IP but not by \\hostname. Ping the hostname replied OK. Any ideas on it?Thanks in advance

NTP always prefer itself as the best I want to use one linux box B as both ntp client and ntp server-- win-ntp-server-B------linux-server-B-------linux-client-C here is my linux server ntp.conf: ------------------------------------------- restrict 127.0.0.1 restrict -6 ::1 # Hosts on local...

I have one Sun v240 and 4 disks installed on it,as we know,this module machine has only 4 slot to insert 4 hard disks.Now all of the 4 disks are being used by solaris9 OS and Oracle database. I knew it is not so difficult to clone one disk to another disk on the same machine using dd...

.13 or .15 is only the typo error as you saw,I still have the problem about the routing path selection! thanks!

yes,you are not stoned! It should be .13,hehe,I am stoned!

Following is the output by some commands: R2#traceroute 10.0.0.14 Type escape sequence to abort. Tracing the route to 10.0.0.14 1 10.0.0.5 188 msec 48 msec 84 msec 2 10.0.0.10 132 msec 120 msec 108 msec 3 172.16.0.2 212 msec * 124 msec R2#sho ip route ... Gateway of last resort is not...

Following is my ospf networking topo. R8 / | area2 R7 |10.0.0.12/30 / | / | ------------------R1 R3--------------- / |____| area0...

We run Iplanet Messaging Server 5.2 on solaris 8. Yesterday one guy sent a big email(>70M) to all@mycompany.com(email address to all people in our company). Because many people spent long time on getting it and failed,so I deleted them directly by command rm -f `find ./ -size 78856743`...

We run Iplanet Messaging Server 5.2 on solaris 8. Yesterday one guy sent a big email(>70M) to all@mycompany.com(email address to all people in our company). Because many people spent long time on getting it and failed,so I deleted them manauly by command rm -f `find ./ -size...

These four DNS servers do not allow recursion for your nameserver,hence it will do you no good as a forwarder, unless you are explicitly forwarding for a zone it is authoritative for. So you can make your dns server as a caching-only server to forward all your queries to the 13 Root dns...

Thanks all! now I ran the metastat,and the disks are mirrored: root@OS9:/# metastat d9: Mirror Submirror 0: d19 State: Okay Submirror 1: d29 State: Okay Pass: 1 Read option: roundrobin (default) Write option: parallel (default) Size: 64648128...

thanks! I don't have a storage array,so it should be soft Raid. I use solaris 9,and use the default volume manage on it. So how can I verify the raid level and more disks info? Best Regards!

I have a sun fire v240 server,now I want to know whether there is a hardware based Raid or not? And If there is hardware based Raid,how to verify its existing by using solaris command or others? If there is a software based Raid on my server,how to verity it and know which level Raid it is...

I want to copy the first IDE disk to the second IDE disk,then put both of them into this machine,and when I power up it,I hope that the grub could let me select which one I want to boot up. can i bring to success?

I have a Intel pc installed redhat linux 7.3,now for some test purposes,i need add a second harddisk into it and want to install another redhat 7.3 OS,I hope that when I power up this machine,the Grub could let me select which OS to boot,could someone tell me the better way to this,thanks!