Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by papagigo1

  1. papagigo1

    merlin magix rel 4

    I wonder why the designers didn't make "0" more flexible before they pulled the plug. Mike in NH
  2. papagigo1

    Setting Up Voicemail on Merlin Magix

    Antaew, I might have missed this but, did you do a board re-number so the processor sees? Mike in NH
  3. papagigo1

    Group-Page with G96xx sets?

    Thanks again ! Mike in NH
  4. papagigo1

    Group-Page with G96xx sets?

    Montyzummer, So, the 8300s LSP acts much like the G3 with duplication, assessing the core link health, ready to take over. If that's a true statement what controls a station to station call (once established) in the same switch, the local Media Processor? Thanks for your help, Mike in NH
  5. papagigo1

    Group-Page with G96xx sets?

    While I have you. When I dial the group-page access extension does the paging come from the core or LSP? What happens if the IP link to the core is down? Can the LSP be programmed to do the group=paging even if the link to the core is working? Just trying to understand the limitations. Mike in NH
  6. papagigo1

    Group-Page with G96xx sets?

    Montyzummer, Thank you very much for the answer !
  7. papagigo1

    Group-Page with G96xx sets?

    Right now I have a G350/8300C with (15) 64xxD type sets all together in group-page #1. If I upgrade to S8300 and IP off an Aura "core switch" using G96xx phones will I still be able to have the "group-Page" ? Thank you in advance, Mike in NH
  8. papagigo1

    Thoughts on dealing with remote access with todays digital lines- what works best?

    Just a note. I administer 31 AVAYA Magix Systems from a central location and use the IP Socket Magix unit made by Interactive Northwest, Inc. It has saved alot of money in travel cost and down time over the years. It requires a "STATIC" IP address at the remote site, is very reliable and...
  9. papagigo1

    SecureCTR/ Merlin Messaging question

    I'm testing a product called SecureCTR on a Lab Windows 7 OS to see if I can get into a Merlin Messaging 3.0 . I can IP into the MMessaging now using WIN XP but Windows 7 doesn't support the 16bit Merlin Messaging Admin software and the (group) I work for doesn't allow "compatability mode" for...
  10. papagigo1

    Night Service after power failure.

    Merlinman and HiDesert I had a customer that says her NS shut off after a power failure, couldn't duplicate it on the Lab switch so I thought I'd ask. Thank you both very much ! Mike
  11. papagigo1

    Night Service after power failure.

    Would a cold/warm start after a power failure default an active NS button ? Has anyone ever heard of this on a Merlin Legend V7 ? Thanks for any info, Mike
  12. papagigo1

    Get messages off Merlin Messaging for court case?

    You can make a .wav file of them, but it's tricky and takes a little practice. You need to have access to an AVAYA Communication Manager PBX with Intuity Audix and Message MANAGER loaded on a lap top computer. From the AVAYA CM call into the Merlin Messaging like your going to listen to them...
  13. papagigo1

    Merlin Messaging 3.0.0.3 June 2003

    Thank you both for responding. I have Windows 7 loading issue with all the Merlin Messaging CDs, 2.0, 2.5, 3.0 and 4.0 . My customer will not allow the use of XP Compatability Mode for security reasons. I thought if AVAYA or someone made a newer CD than maybe it would be compatable with the...
  14. papagigo1

    Merlin Messaging 3.0.0.3 June 2003

    I have a Messaging 3.0 disk May dated 2003, are there any upgraded versions to the 3.0.0.3 ? Thanks for any comments, Mike
  15. papagigo1

    Merlin Messaging Unified Messaging software on Windows 7?

    Jaduke, I have installed Merlin Messaging 4.0 on a (Windows-7 Pro) using XP compatability mode, if you don't have it with your "7" I think you can download it from the Microsoft site.. Let us know how you make out. Mike
See more

Part and Inventory Search

Back
Top