Recent content by palhello

It seems to be rj45 crimping problem. I removed the switch from two computers made a cross-cable connection between the two computers and now it is working like a charm. And now I think why the heck did I buy the switch for ? May be I will use it when I have more than two computers. Or is...

Doesn't seem to work :(. Let me rewire all the rj45 plug out one nic, and check if there is a one on one connection.

Here is the new route print..not much different =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...4c 00 10 72 0a 2b ...... Intel(R) 82566DC-2 Gigabit Network Connection - Packet Scheduler...

I only have 2 computer so I can't say which IP I am pinging from both. I can ping 192.168.0.1(windows) from linux. I cannot ping 192.168.0.100(linux) from windows. Is my routing on windows all right ? Please analyze the route print that I have given earlier.

It is a 8 port switch. Both linux and windows are on 100Mb Full mode. I even turned off the auto negotiating part. I am still not able to ping linux..what's wrong... One thing that I have noticed in the linux box is that $ssh user@127.0.0.1 seems to work fast almost instantly however $ssh...

One simple question, how do I resolve it ? i turned on the link mode of the NIC from Auto Detect to 100 Mbps Full Duplex mode..still no luck.

ok I changed the windows setting a bit Windows IP Configuration Host Name . . . . . . . . . . . . : dualcat Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . ...

All Firewalls are turned off both on Windows and Linux. Even turned off the SELinux. Could it be a switch problem ? I can ping 192.168.0.1 which is the self computer...and the light is green..

I am using a switch...I double checked the cables.. Should the color coding of wires have anything to do with it . I don't have cross connection. At each side I have OrangeWhite,Orange,GreenWhite,Green,BlueWhite,Blue,BrownWhite,Brown The switch led shows green so I don't know what's the...

Windows IP Configuration Host Name . . . . . . . . . . . . : myhost Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area...

Ok, here is the scenrio. I have got a headless linux box with fedora installed and Windows XP professional. Windows machine has two ethernets (one for internet via pppoe and the other for LAN). I just want simple networking. But here is the problem. One ethernet is in 172. range with...

Well, the mouse and keyboard works on pre-windows. I can even get into the good old Fedora. Its windows specific. I might have deleted the keyboard drivers somehow but I don't know how to get them back without going inside windows. I am prompted with the logon screen both at startup and safe...

I was playing around with a multi-pc program elcsoft (or something like that)..it ate up my task manager. So when I press ctrl+alt+del I would get all the option but when I press process it wont show any process (*This is a different issue than the double click on where task manager itself goes...

Isn't it some way I could do it through the same account since the software was installed using the same account. One thing that I noticed during the software installation was that the registry and gpedit.msc popped up a few times. So I guess the software did made some registry changes. My guess...

I was trying to install a software called MultiPC, which eventually failed and my task manager has gone bad since then. The effects are: my XP logon screen is gone and it is replaced with traditional login and I don't know how to chanage that. More important issue is my task manager is not...