Recent content by Pace1

if you need a good CSU/DSU mini DAX llok into carrier access www.carrieraccess.com thats what we use and they are very very good Double, sounds like u should just have to de-provision the lines u want. to deprovision feature 266344 / hit next till u get to maintence/ show / then next till u...

the rad agent works fine but u are dependent on a computer stayin alive and if they take the littlest pwer hit it messes ur connection all up. I had been installin it but stoped because of that reason. If I said it, It has to be true. Mario Mazza

remember if the lines are in a pool u need to set the lines to public not pool so the system dont try to access them for outboud calls If I said it, It has to be true. Mario Mazza

is it a new RAD or a existing RAD u took from another system ? If I said it, It has to be true. Mario Mazza

I know 192.168.110.10 is the default IP Call pilot puts in the unit. But u can change it. upon start up use a 9 pin to 9 pin cable connected to your com port on your PC/Laptop Run your term. emulation programm set for 9600 baud and com 1 or whatever com port ur hooked to. right away as you...

there are a few dealers in here that would be more than happy to sell u 10.0 I recently bought it myself and it is NICE very NICE. nortel really did good with this one. But now as to your busy problem.. we had that same thing happenin to us but ours were fax machines. and we just made the...

curly has it right on where to start. If you have another Amphonal connector that u can cut one end you can always just crimp a RJ11 on the blue pair and plug it in the KSU to eliminate the 66 block and cross connect . Also make sure the SW is seated all the way in the CICS. I just got...

U can have him try NM 3.7 it worked for me when i was runnin windows 98 and working with DR5 (8x24's) If I said it, It has to be true. Mario Mazza

oh I forgot to mention on our CICS's we hooked the analog port into the line in on the router then removed the line apper. from the DN. we then set up a CCR tree with a secret option 8 wich does a transfer to that DN . works pretty good as a back door in If I said it, It has to be true. Mario...

now I dont know if this is a possiblity for you but here is what we have done with our Call pilot 100's we bought a Modem router and bascily use it as a smart modem. hook in a 1fb to the line port on the unit then give the modem router a ethernet connection to your local LAN or if no local lan...

1073217709889664 <----this magic number works on most local pots lines to give u the line info back on it . (800) 337-4194 <----works to tell you who the 800 service is with sometimes depending on your long distance provider I had to add a 10 in front of the 1073217709889664 so it would be...

sorry but the reason I didnt give u the exact procedude is because I've never personally done it. I do know there is a reset command in there and a reboot command and a few others that might be able to help you. If I knew more I would tell u. Im sure there are a few others in here that might...

u CAN DO IT THU THE SERIAL CONNECTION OR A TELNET SESION BUT U HAVE TO BE CAREFUL AS U ARE IN THE SHELL COMMANDS THE LOGIN FOR THE SERIAL CONNECTION IS Login= tas Password= POU4F3 BUT BE CAREFUL THIS IS A VERY DANGEROUS WAY If I said it, It has to be true. Mario Mazza

if any of you are lookin for a real good piece of equipment to manage your data netwok as well as your voice just go look at this stuff www.carrieraccess.com and look at the Adit 600 I am not tryin to sell them and I DO NOT work for them . We just use to have a bunch of telco provided...

okie dokie If I said it, It has to be true. Mario Mazza