Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Pabxer

  1. Pabxer

    Back up with another NIU2

    I heard something that there is a way to make a back up of one NIU2 board on another NIU2 board, which is then placed out of PABX and kept as a reserve in case that active NIU2 board fails. Is there some procedure for this ? Is it explained somewhere in Alex ? It is BC12 in question. Thanks ...
  2. Pabxer

    TLU 75

    Can TLU 75 board be used as an analogue tie line, to connect two MD110 pabxes ? Which signalling protocols are supported on each MD110 trunk boards? I can't find these informations in Alex. Thanks !
  3. Pabxer

    Quality of Dialog 4223 Phones

    to whosrdaddy : Hi, we checked the headset mode - it wasn't activated. I checked <C*4> and it gave the following result: CAA 1580026 R3M Selftest OK. What does this number mean ? And does this mean that the phone is ok? to slash50 : We also think there is something wrong with the...
  4. Pabxer

    Quality of Dialog 4223 Phones

    Hi, just as 1 year guarantee period has expired ... two out of four 4223 phones that we have at the moment started to work improperly. The same thing on both phones : When I lift the handset I don't have an immediate exit on Line1, I have to press Line1 button. And also, to end the...
  5. Pabxer

    LEGRAND patch panels

    Thanks for answers. I just got tired and haven't visited forum since my last post. Anyway, it's now more an internal policy company problem, rather then technical one... because I of course agree that we should hire someone professional to fix the problem instead of messing with an incapable...
  6. Pabxer

    LEGRAND patch panels

    to mforrence : We tested it with simple tester and we saw that it "skips" pin 1. But, we also ( when contractor refused to admit there is something wrong) hired a proffesional company and they tested it with FLUKE OmniScanner on Cat5. 50 % jacks FAILED on test and all of them on 1st pin...
  7. Pabxer

    LEGRAND patch panels

    Thank you for your answers. The thing that's also confusing is that the constructor brought few original LEGRAND cables and with these cables situation was better, but still there was losing of contact at random ( but less, I must admit), or when touching a connector on patch panel - what we...
  8. Pabxer

    LEGRAND patch panels

    Hi ! A year ago we got some 15 patch panels installed in a new building and we are having problems with it since the first day. We are losing contact on all jacks at random, or when slightly touching the connector and testing showed that the loss of contact is due to the loss of signal on only...
  9. Pabxer

    CIL won’t work – shows two same cil paths !

    Hi ! We have very strange problem ! The result of FIDAP command in cil folder shows two cil paths with no files in it, although we initiated cil function on hdu . This is what it shows : <FIDAP:PATH=/SYSN/USR1/ACS/CIL,OPT=ALL, FILE/DIRECTORY DATA PATH : /USR1/ACS/CIL...
  10. Pabxer

    Problem with XMODEM over V.24

    2whosrdaddy : yes, you suspected on the right thing :) 2md110user : Well, I do the same procedure I wrote above over modem port too. Maybe you should first check with FIDAP did you write the name of the file correctly ( it goes without file type mark ) Is your modem port not working only...
  11. Pabxer

    Problem with XMODEM over V.24

    Sorry ! Silly us ! We just saw we didn't type that ... we typed FICPI with IODEV and PATH parameters instead ... Our mistake. Now it works !
  12. Pabxer

    Problem with XMODEM over V.24

    Well, only what I wrote above ... FICPI:SPATH=/SYSN/USR1/ACS/CIL/filename,IODEV=SYSTERMINAL2; and then after ready for transmission ,in WinFiol, Run --> X-modem --> Do I need some other command ? It's BC12 in question.
  13. Pabxer

    Problem with XMODEM over V.24

    Hi ! We initiated V.24 port as MML port and connected computer directly. It works when using it for sending MML commands by WinFiol, to PABX. BUT, when we try to use XMODEM option to transfer a file from HDU to a connected computer, it won’t work ! We do the same procedure like over modem...
  14. Pabxer

    IONCI

    Yes, thank you very much. I got also help from our technical support today and I understand now that network port doesn't have to be OUT for this purpose. Now it works ! Thanks :)
  15. Pabxer

    IONCI

    for BC12 : Is it necessary to initiate a network connection with IONCI in order to pick cil files on hdu by MDDT over network port ??? Thanks
See more

Part and Inventory Search

Back
Top