Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Otherdutiesassigned

  1. Otherdutiesassigned

    Cannot logon to 61c

    GHTROUT I was ready to ring your neck when I read "Caps Lock". I attempted to logon with two different computers and even tried remoting into the modem. I just logged in using with caps lock and now I can log in again with lower or upper case. I'm feeling very inadequate right now. Thank...
  2. Otherdutiesassigned

    Cannot logon to 61c

    Not a keyboard issue. Just no response. TTY 02 SCH MTC TRF BUG 14:24 OVL111 IDLE 0 >logi xxxx TTY 02 SCH MTC TRF BUG 14:27 OVL111 IDLE 0 >logi xxxx TTY 02 SCH MTC TRF BUG 14:27 OVL111 IDLE 0 >logi TTY 02 SCH MTC TRF BUG 14:27 OVL111 IDLE 0 >logi xxxx TTY 02 SCH MTC TRF BUG...
  3. Otherdutiesassigned

    Cannot logon to 61c

    I cannot log into 61C with any method. I've even tried directly connecting to the com ports on the PIV CP. The switch will not respond with the password prompt after logi. Any suggestions Thank you in advance
  4. Otherdutiesassigned

    Option 61C group call

    Thank you guys! I configured a Group call (LD 18) and then a Flexible feature code GRPF with the 4 digit number.(LD 57) Seems to do the trick!
  5. Otherdutiesassigned

    Option 61C group call

    We currently have a fire bar and are converting to a digital phone system. I was wondering if there is an easy way to set up a group call or something similar to ring multiple stations even after one station has picked up. When any phone on location dials 9911 nine different parties must...
  6. Otherdutiesassigned

    Paging problem with E&M trunk card

    Perrypj, I originally set the TKTP to pag in the RDB. The Trunk data block TYPE=PAG and the XTRK=XEM. Was this incorrect? After reading your response I configured my RDB as a Tie but it will not let me add the RTMB. Route type/station type conflict. Thanks again
  7. Otherdutiesassigned

    Paging problem with E&M trunk card

    Hi, Our 61C is using a universal trunk card for our overhead paging system but we are out of ports. I now need to add another PA and was hoping to use the E&M NT8D15 trunk card. I set the RDB and the TDB just like the UTC but cannot PA via the ACOD (TGAR is OK). I can PA with a buttset. This...
See more

Part and Inventory Search

Back
Top