Recent content by oskare100

Hello again, Here is what happens when I try to change in the way I mentioned in my first post: [root@localhost ~]# localedef -i sv_SE -f ISO-8859-1 sv_SE.UTF-8 [root@localhost ~]# export LC_ALL=sv_SE.UTF-8 [root@localhost ~]# export LANG=sv_SE.UTF-8 [root@localhost ~]# locale LANG=sv_SE.UTF-8...

Hello, I've worked a lot to get my server working but now I discovered that I choose wrong language support when I installed CentOS 5. It works in HTTPD to set the default charset to UFT-8 but when I try to use PHP functions as ucwords() and when I try to phrase XML it doesn't work as it should...

Hello, I've tried now for several hours to get my Zebra LP 2844 label printer to work with Linux and CUPS. I have tried with all of the drivers in CUPS (there are three; one EPL1, one EPL2 and one ZPL). I've checked so the printer works OK when it is connected to a windows machine and everything...

Hello, I'm looking for a fax to email solution for asterisk, I've searched but I didn't find any with feedback that said that the solution was actually working but I've read at forums about my VoIP provider (digisip) that faxing with the works quite good. I'm also looking for a email to fax...

Hello, I have two problems; I can't answer calls and I can't call anyone on the outside. But I can call the server and navigate through the menu and hear the recorded voice messages - but as soon as I try to answer from a softphone the call gets disconnected. Here is what I get from the...

Hello, I'm trying to setup an asterisk SIP server with SIP softphones on the same network, the problem is that I only get a timeout error when I try to register with the server. Here is the SIP account config in sip.conf: [test] type=friend username=test secret=test callerid=212 regexten=212...

Also, I created /dev/md0 and /dev/md1 now by misstake when I tried another guide and now I can't remove them... They are based on /dev/sdb1 and /dev/sdb2. How can I remove /dev/md0 and /dev/md1 now to be able to continue without reinstalling the system again?

Hello, Sorry but I don't really understand how to follow that guide, how can I do the following: 2. With fdisk, create a new partition of type fd on your new drive. 5. At this point, /dev/md0 is fully usable. Mount /dev/md0 and copy the contents of /dev/sdb to /dev/md0. 6. Unmount /dev/sdb and...

Hello, I had one disk before (/dev/sda) with two partitions, one swap and one ext3 where all the files are located. Now I've added a second disk (/dev/sdb) and want to create a RAID-1 disk of the two disks (based on the current /dev/sda disk). How can I do that? I've installed mdadm but I can't...

It doesn't mount/I can't see it from the system. And if I set the CD to master I can't see the harddrive.

I found the problem, the SATA ATA combined controller couldn't enable dma for the ATA drive so I added to the boot line to make bios load dma by adding it as SCSI drive. However, now I can't add the ATA CD reader. As soon as I add it the hdd stops working or the cd stops working... Any ideas?

Hello, First I installed CentOS 5.0 and I configured it with software RAID 1, two disks - one IDE 160 GB and one SATA 40 GB. Here is the setup of the disks: RAID: ~40 GB RAID 1 md0 ext3 ~500 MB RAID 1 md1 swap Disk1: ~40 gb software raid md0 ~500 mb software raid md1 Disk 2: ~40 gb software...

Hello, I'm currently using this page to get information about the buyers email, Ebay status and the Ebay transaction ID of a transaction at Ebay. The problem is that I also need to get some more information from the XML reply, but I don't know how to do it. Here is the page: <?php if...

Hello, Is it possible to make a PHP script which does the following when it runs. 1. Creates a code 2. the code gives access to a page for one hour/dag/month, then you'll have to buy a new code to keep get access to the page. (the scipts if for selling midi files and should give acces to the...

Hello, Most of the switches don't have functions like monitoring etc. and I don't want to spend a lot of money on a swith. Best Regards Oskar R