Recent content by Orim

Hi all, I need scheme Fetap 0111. Would you send me please scheme Fetap 0111 if you have it. I’ll be very grateful. E-mail: m_ivanov@btc.bg Thanks. Miro

Hi Vladimir, I had the same problem. I fixed it by replacing (not with new one) LSU and DSU board. Only pull and push these boards 2-3 times. Replace the connectors too.

Hi baf, I connected PA41 PRI analyzer equipment to monitor 2 Mbits and sow that our exchanges sent A-number. So it turned out that the problem is in AXE10. They changed something and the problem was fixed. Thank’s baf for helping!

Hi baf, I tried this but nothing happened.

Hi Jaydee2002 Thank you for reply, This is the answer from ROELP. NOT FOUND EXNOPU PER LIM

Hi all, In thread CALLER ID I explain my problem.(look thread CALLER ID bellow). AXE10 people said to me that I must set in MD110 type of number – Subscriber and MD110 must be set to send all number – 9171xxx, not only xxx. How can I make this? Thank you in advance!

The ADC bit “network affiliation” is set correctly =1. EXNOPU was 2-9171 and 4-9171. I added 0-9171, and 3-9171 but the result is the same.

Hi friends, I need a help. Our exchange md110 has connected to AXE10 via TLU76 (PRI ISDN). Our directory numbers are 2xx,3xx,4xx,5xx. The problem is whit outgoing calls. The caller ID information that B-number receive is 9171 200 instead of 9171 xxx. (For example – I am dialing from extension...

Yes of course! I am a stupid man! I have pressed a button ODN2 off. The same was happened whit our secretary phone ITYPE 20. That made me to thought that the problem is into the exchanges. I didn’t think that it is possible I and our secretary to make simultaneously something whit our phones...

Hi all, I have a digital key system telephone ITYPE 2 (DBA 702) It has 2 own directory numbers (access 1 and access 2). Wen I am talking through line 1, line 2 is free and I can receive calls (external and internal) through line 2. But now wen I am talking through line 1, I can not receive...

My E-mail is: m_ivanov.niis@btc.bg The only documentation that I have is DocView. It is not bad but it is for BC 7.2. Send me please a copy of the Fault Locating Manual. I think it will help me. Thanks

Hi, Can you send me a full description of all fault codes for BC9! Thank you in advance!

Thank yuo very much!

I'm putting the finishing touches on a project i'm quite proud of so far. I want to ensure, though, that nobody can mess up the appearance or opeation of my scripts. This is a multi-user program, and the way it's configured screens out the possibility of anyone entering bad data. EXCEPT...