Recent content by Olfgeek

The Xerox part number for the Toner cartridge selector/paper eject unit is 118-9897-02. The Xerox price is $510 + S/H. I have a used unit in good condition which I will sell for $100 + S/H exchange (return of your part to me). Guaranteed not DOA. Note however, that there may be other causes...

I am sorry, but I believe that the top roller that you refer to is the fuser roller. If the tear is small enough so it doesn't effect the copy, go ahead and use that fuser. Otherwise, you will have to replace the whole fuser. If you do replace it, save the Fuser Roll, on top of the Fuser, it...

For the manuals in pdf format go to the Xerox web site.

This is a problem that involves much more that just the 740. Images are stored in you computer as RGB. To print to the 740, this image must be converted to Postscript by your computer and the sent via either the parallel port or the network to the 740 where the 740 must convert the Postscript to...

Cleaning the rollers per the manual should fix this problem.

I have found this problem to usually be too much toner or some (but not all) non-Xerox toners. Try going into the front panel Menu to Calibrate Colors and adjust the color or colors that seems to be causing the flaking ( I find usually black or magenta)to -10 intensity. If this solves the...

Jam at C is usually an indication that the feed rollers need cleaning. Follow the instructions in the user manual. Be sure to clean all the rollers, not just the one you think may be the problem,