Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by oldnixguy

  1. oldnixguy

    Linux client Disaster Recovery

    Were you able to boot your server after re-installing the OS?
  2. oldnixguy

    aix 4.3.3 stty echo problem.

    Thanks all ... Turns out that the priority this was, isn't any more ... I'm going to file this away in case it becomes a priority again..
  3. oldnixguy

    aix 4.3.3 stty echo problem.

    I'm looking to disable what appears to be a double echo on a serial port. I'm pretty sure I used to know how to do this, but I guess my brain is slipping ... Any thoughts, pointers would be appreciated! Here is my setup... I have a M80 with a RAN attached. I'm attempting to set up a new...
  4. oldnixguy

    Tapes not expiring

    Thanks ... I may have been wasting my time chasing that undef value!
  5. oldnixguy

    Tapes not expiring

    state volume written (%) expires read mounts capacity 10000E 223 GB full undef 115GB 121 160 GB This is the output of "mminfo -q "pool=Nix Pool" -m" I'm trying to figure out the "undef" reference. I get groups of tapes that cycle through as undef.
  6. oldnixguy

    Tapes not expiring

    605 --- Does this mean, then, that when a volume is "undef" that NW will grab it and mark it recyclable as soon as it needs it (when there are no append, or recyclable currently volumes available)?
  7. oldnixguy

    AIX 4.3.3.0 SAN/Storage Questions

    Thanks all for the input. I guess I should have pointed out that I'm also stuck with AIX 4.3.3.0. The DS4300 was my first choice, but I can't find in any of the data sheets that AIX 4.3.3.0 remains as a supported option. The use of the word "supported" there is, obviously, questionable! I'm...
  8. oldnixguy

    AIX 4.3.3.0 SAN/Storage Questions

    I have an three RS6000/M80s which, due to issues too long to detail, I am unable to upgrade or migrate away from. I do, however, need to do something with its storage infrastructure, and some type of SAN solution seems best suited for my needs. Want I would like to know is if any of you fine...
  9. oldnixguy

    Odd jfs question

    I need to migrate from and old storage enclosure to a newer "old" storage enclosure (legacy modernization). The system I need to change storage on is running 4.3.3.0. Is it possible for me to configure the new file systems on the new enclosure with it connected up to an 5.3.0.0-03 system and...
  10. oldnixguy

    AIX 5L / VAC 6.0 / Oracle 10G Oddness

    Thanks for the direction! Great and timely response!
  11. oldnixguy

    AIX 5L / VAC 6.0 / Oracle 10G Oddness

    My dba received this error while upgrading an oracle instance to 10g. My searches so far have found nothing. Any idea's what this is? 5876762.992 SGSLUFREAD: HARD ERROR ON READ, OS ERROR I'm at ML 5.3.0.2. Thanks ---
  12. oldnixguy

    Who has exp. with the new Storagenode build in in EMC DL7x0

    I was part of the beta on the CDL 2.2 with a dl710 (build 1315) and now have it in production (build 1320). During the beta I tested the direct to VTL backups using the storage node. I had two VTL's configured, one assigned to my NetWorker server and one assigned to the Storage Node. We took...
  13. oldnixguy

    Who has exp. with the new Storagenode build in in EMC DL7x0

    I've got a DL710 with the storage node feature. It's capable of more than just cloning. What would you like to know, I'll answer if I'm smart enough!
See more

Part and Inventory Search

Back
Top