Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by odhiambo0

  1. odhiambo0

    IPO 500v2 - Locked Telephony options

    Spot on! I did not even think this was the case. Thanks.
  2. odhiambo0

    IPO 500v2 - Locked Telephony options

    I have noticed something rather strange on my IPO. I have 20 users so far. Out of those 20, there are 5 users who have locked options under Telephony settings. So under Telephony-> {Call Settings| Supervisor Settings| Multi-line options) there are entries which appear with a padlock, meaning I...
  3. odhiambo0

    DHCP Options and IP Phones provisioning

    I am not on a scrambler, gentlemen. I am listening:-) @intrigrant - 252 ??? @tlpeter - 272 ??? Susceptibility to typos or those are new options? @NewNic - thanks. Gentlemen, I am most grateful for all the advise. It is now clear to me that Avaya IP Phones need only 176 (old phones) and...
  4. odhiambo0

    DHCP Options and IP Phones provisioning

    I need where it is ALL documented:-) I am guessing there is more than just 176, 242, 66... aren't there more? :-)
  5. odhiambo0

    DHCP Options and IP Phones provisioning

    @hairlessmoneky, I am sorry, but what I was looking is a definitive list of DHCP Options related to Avaya IP Office. It's not hard for me to make sense out of it once I get the list. I love RTFM:) I have seen 176, 242, 66, but wanted to see if there is a document with the whole shebang list...
  6. odhiambo0

    DHCP Options and IP Phones provisioning

    Hi I have several IP phones: 4610s, 4625s, 1616s, 1603s and 3645s. I have scoured the Internet looking for documentation on how to automatically provision these phones. I have a feeling I can get them to automatically get the required parameters from a DHCP Server using dhcp options. I use...
  7. odhiambo0

    SIP Trunk weird behaviour - IPO500v2 behind Cisco NAT

    Thanks for that! You've cleared my mind on something I was reading from the help page - registration domain. Anyway, I guess I can beat that dog using Cisco! Time to extend the reading again.
  8. odhiambo0

    SIP Trunk weird behaviour - IPO500v2 behind Cisco NAT

    A big up to everyone who helped advise me on this mission. I am greatly indebted to all of you for your support. My system is now up and running. It's my 1st SIP setup ever so you can imagine how pleased I am with myself, but it's because of you that I got the confidence to carry on! My next...
  9. odhiambo0

    SIP Trunk weird behaviour - IPO500v2 behind Cisco NAT

    I will pick that 404 up with the Engineer at the SIP Provider.
  10. odhiambo0

    SIP Trunk weird behaviour - IPO500v2 behind Cisco NAT

    Hmmm, lemme try this again. When I have: 9N; Dial N"@41.207.65.197" 17 What does the 404 suggest in this scenario? I get nothing happening. The dialed string stays on the phone screen until it times out: Trace: ********** Warning: Missed 2 packet(s) Total late 0 packet(s) **********...
  11. odhiambo0

    SIP Trunk weird behaviour - IPO500v2 behind Cisco NAT

    @tlpeter, mea culpa. That was a typo, actually. As you can see, even the closing " was missing. What I have is N"@41.207.65.197". Sorry for the misrepresentation. However, I believe the traces have the clue hidden in there.
  12. odhiambo0

    SIP Trunk weird behaviour - IPO500v2 behind Cisco NAT

    @holdmusic34, the SIP provider has given me the test number of +254206190790. I have entered this as-is on each extension's SIP authentication tab. Let me try again and see what happens. I am not sure I should have the (+) but most documents I've read during the exercise seem to say I can have...
  13. odhiambo0

    SIP Trunk weird behaviour - IPO500v2 behind Cisco NAT

    It's my first SIP Trunk ever, and it's my first IPO 500v2 ever so this is pretty new to me. I have read so many articles enough to get my SIP Trunk up, but working with weird behavior. My IPO is connected using LAN1 behind a Cisco router. I has to forward port 5060 on the Cisco to the IP...
  14. odhiambo0

    IPOFFICE 406V2 - H323 IP Telephone

    Someone please make me understand the question correctly, and some answers. My understanding of the question is that the poster wants to establish whether or not he can use IP Phones with IPO406v2. To that I say the answer is YES - as long as there is a VCM card installed on the control unit...
  15. odhiambo0

    How many IP ENDPOINT Licenses do I need?

    amriddle01 - that is true. I think at that time I unknowingly posted something that is against the rules although I honestly don't recall what it was:-) I am hoping I will not fall into that trap again. So, If I plan to have 45+ phones, I should probably to get 60 end-point licenses?? Hmm, this...
See more

Part and Inventory Search

Back
Top