Recent content by obukev

I dont have access to UDP tables :/ I wish I did... it would have made the Asterisk to Definity integration alot more manageable. However, routing calls via coverage path and coverage path remote is working well for us too. The biggest pain is the decision by "greater powers" to discontinue...

I have the following subscribed ports availability: TOTAL SUBSCRIBED PORTS ISDN BRI Ports: 0 1000 1000 Station and Trunk Ports: 1394 6 1400 I am using X ports for extensions routed through a DS1 interface tied to Asterisk VoIP PBX. Our...

Thanks so much for everyones help. My job requires... like a lot of you... an office with many "hats", and this is one that I am relatively new at. I think I could pass a google certification in a heartbeat. I really appreciate all of you who dedicate some of your time for people who need you...

I found this on ebay. It is a 48V .4A power supply from lucent.... Will this work: http://cgi.ebay.com/Lucent-1151A1-Power-unit-class-2-phone-power-supply_W0QQitemZ330277362907QQcmdZViewItem?_trksid=p3286.m20.l1116

OK... I can do that. Just to make sure then... how many pairs are needed for the console itself? If it is using Phantom power now, and I put 48VDC on the brown pair, will it cause an over-voltage condition? I guess what would answer my question here is a pinout for the connection to the...

OK... here is what I see in the MDF. The person that handles the wiring of each extension from the MDF has no documentation as to where the console is punched down. The port for the console in the switch is 01A0301, and I found a cable on the wall attached to a 66 block that says Aux 01. On...

I can do that, but what exactly am I looking for?

I am revisiting the relocation of the attendant console here in thread690-1464273. What I need to know now is how to tell if I am Phantom Powered or Locally Powered. How do I tell if I am powered from the auxilary slot or not?

That is exactly what I needed.... you guys are awesome. Thanks.

I have been directed to explore my options in relocating our "Main Switchboard" from the IT Dept. to the Campus Safety office accross campus. My questions are simple. Since the Attendant Console operates on a digital line, is there distance concerns if the move is indeed warranted? If there...

Im not sure if what I am doing is the norm, but I do have something suitable working for our environment. I would be happy to explain to anyone what I have done on the phone. I will post later all of my configurations via a white paper, but6 it is not complete, and i dont want to post in...

No one?

I have a working configuration with Asterisk and our Avaya Definity G3si, but have a particular issue that is driving me crazy. On the definity, we have extensions setup that cover 2000-3299. These are directly associated with DIDs that work with no problem. On Asterisk, we have extensions...

PHQNEMAN, I would definately like to take advantage of this if I can configure it properly. I have created extension 4002 as an x ported station; I have changed cos 12, giving it console permissions, but I did not see any place to assign that station in the COS. I may really be exposing my...

Thanks for the suggestion, but I do not have vectoring enabled on the Definity. I have decided to setup each station on the Definity as an x ported station and create its own coverage path. I then change the coverage path and set point1 to a coverage remote number. I then do a change cov r...