Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by nsantin

  1. nsantin

    HELP: BCM3.6 VoiceMSCService Wont Start

    The BFT was replaced years ago when the recal came out for the bad caps. If it still had leaky caps it would have exploded by now :) Im sure forcing the firmware reload would be the next step and probably fix the issue, but can't find anyone that knows how to do that. Even the tech today said...
  2. nsantin

    HELP: BCM3.6 VoiceMSCService Wont Start

    Thanks for the reply, already tried reseating, moving PEC cards, cleanig, blowing, praying. The MSC Core load fails, the Universal profile hangs at step 1.2 and I have no dialtone on the digital sets. MSC is definitely the issue. Im able to get into the VNC session and see NT boots ups fine, so...
  3. nsantin

    HELP: BCM3.6 VoiceMSCService Wont Start

    Tried that, then it errored out saying "Error establishing DChannel with MSC". Now its stuck in a musical tones reboot cycle and LED 1,9 and 10 are blinking Red in seried (1-9-10, 1-9,10, etc)
  4. nsantin

    HELP: BCM3.6 VoiceMSCService Wont Start

    Hi, I tried to image the HDD so I would have a spare, that seems to be sucessful. However when reinstall either the original or new imaged HDD the system wont fully boot. I can login to Element Manager and VNC into the WinNT box fine. The error Im seeing is: VoiceMSCService !*...
  5. nsantin

    BCM200 3.6 Backup hardrive

    Thanks for the tip, i've seen some FAQs on this and the refer to using the nortel BITs or some command line switces for Ghost. If i image this, i suspect I need to pull out the drive and put it into another machine with both the new target drive right? (3 HDDs in total) Does the new drive...
  6. nsantin

    BCM200 3.6 Backup hardrive

    Hi, We have an older BCM200 running 3.6. Upgrading at this time isn't feasible. I'm looking to purchase a new/refurb 3.6 HDD and keep it on the shelf in the event the current one fails. I've reviewed the FAQ on replacing a drive and it looks pretty straightforward, I assume the last step...
  7. nsantin

    BCM 200 and Windows 7

    Delphi
  8. nsantin

    BCM 200 and Windows 7

    Thanks telcodog. Ironically we bought the system in 2003 from a company that was absorbed by Allstream years later. We dumped them long before the acquistion. I really dont want to buy a BCM50, I was only price comparing. If 6k is an accurate number then I'll just replace the whole thing with a...
  9. nsantin

    BCM 200 and Windows 7

    So I just got a quote on a 200-->450 upgrade. $6k CAD!!! Apparently we need to upgrade to 4.0 before you can upgrade the HW and goto Rls 6.0 We only have a GATM8, 4x16 combo card, some ATAs and about 12 ip phones (about 20 extensions in total). I can't beleive it's this expensive when i see...
  10. nsantin

    BCM 200 and Windows 7

    OK thanks for the info, I was initially looking at the 50 becasue at first glance it appears to be about $2500 price difference, but to be fair I didn't get a price for an upgrade,just new systems. Im going to test the i2050 phone under "XP Mode" to see if they work, and if so then use that for...
  11. nsantin

    BCM 200 and Windows 7

    Hi telcodog, yes this is what I've been told, that I need a H/W upgrade. My question is 2 fold: 1. Is there no other option then a Hardware upgrade to support Win7? (i.e. perhaps some version of 4.x) and if not then: 2. Can I goto a 50 instead of a 450 a retain my keycodes? Thanks
  12. nsantin

    BCM 200 and Windows 7

    Just to confirm, are you saying there is no software O/S version I can install on the BCM200 to allow me to use UM or Softphones on Win7? If this is true, then next question is do you know if my keycodes can be converted from a 200 to a 50? (I think they said I could go from 200 to 450, but the...
  13. nsantin

    BCM 200 and Windows 7

    Hi, We have a BCM 200 running 3.6 We are starting to rollout Windows7 and one of the Nortel/Avaya partners we spoke with said we cannot upgrade the 200 to a version whcih supports Windows7 for UM and IP Phones. Apparetnly we need to goto Version 6, but it's not available for the 200. Only...
  14. nsantin

    New Checks

    Are you familiar with report writer? You need to modify the report and make the changes there then set the users to use the modified report.
  15. nsantin

    Barcode press Ctrl+S on keyboard

    Check if your scanner has "Full ASCII" enabled
See more

Part and Inventory Search

Back
Top