Recent content by NIUX

1. Yes, up to 400 DTMF receivers in parallel or serial mode (Configurable in ASPAP 239) 2. Yes, MGU and SPU4 can not be combined in the same LBP22

Hi, ELU28 with PROM RYS 102669/1 R1C ===> will be R3A ELU29/11 with PROM RYS 102662/1 R5B ===> will be R4B BR///

Print PCLOP:UNIT=KLP1T1; BR///

Hi Daddy, Some links solved by GJBLI > GJRFI > GJBLE Others solved only by GJBLI > GJRFI > GJLIE > GJLII Thanks for your help. BR/

Hi, GJALI command will change the alarm level and it will add "ALARMING ERROR RATE = 5*10EE-3" print it in GJLSP command. Is there a way to remove this printout? BR/

Hi, Some LINK CAPABILITY in multi LIM system changed from LONG to SHORT after system disturbances. NOW, the system is stable. But the some of the links remain SHORT. Ending and Initiating those links didn't help. How to correct the link capability from SHORT to LONG again? Note: All H/W are...

Hi PCLOP, Route optimization is NOT supported yet over IP-Trunk. It will be supported "hopefully" on MX-ONE v3.1 BR///

Hi RhythmAce, It works fine. Thanks for help. Regards,

Hi RhythmAce, Thanks for your answer. I found a lot of .conf files and don't know where to edit. Kindly help me on this. Regards,

Hi, Is it possible to access the server remotely (SSH, TELNET, FTP) using root? I am using SuSE Linux 10 Thanks in advance. Regards,

Try this: KSTSC:STRNO=IDL15,STRING=" "; AND NIINI:DIR=xxxx,LIST=1,NAME=" "; BR///

Each board can handle 16 signalling channel (Non gateway). Each gateway call need 1.5 signalling channel from the board. So, the board with 8 gateway calls need 8*1.5=12 signalling. Then you can have 4 remaining signalling. If you have 7 gateway calls 7*1.5=10.5 >>> 11 signalling. Then you...

CSP=0 is the default common service profile for any locked Generic Extension. BR///

If this is BC12 try: SACOP:UNIT=DER,DSOFF=28&&31,FILNO=6,LIM=9,POINT=3AC; or SACOP:UNIT=DER,DSOFF=28&&31,FILNO=6,LIM=9,POINT=3AD; BR///

Hi, Most probably it is an LSU problem. BR///