Recent content by nithin6926

Hi Buddy Really I am not much into Cisco but then the device TG-4C you have there doesn't require any external voltage and just requires a dry contact closure. Your FXO should do that only if you can configure "supervisory disconnect" and "Loop signalling" correctly. -- Nithin

[thumbsup2] Let us know after your issue is resolved. BR Nithin -- Nithin

Yes HIMDP, you are right. I might have overlooked it [bugeyed] @Anlly => Buddy, check it on Hyperterm, configuration is running good... still not coming,, try to change the I/O Port. -- Nithin

Hi Buddy As per this "/SYSN/USR1/ACS/CIL/ CIL-1 READY/STARTED C" you have an output file CIL-1 now whereas earlier it was only SMDR. Did you initiate it? anyways.. the " READY/STARTED " indicates that the output generation has started. you should get data on the serial port. -- Nithin

Hi Buddy This seems to be a peculiar issue. I remember I faced the same issue for which we need to implement a patch which Ericsson provided. You may need to contact Aastra maybe through a partner. -- Nithin

Hi Buddy you already have a file initiated "SMDR" Do you require a new one here? If yes as HIMDP said you need to initiate the file with "CLDFI" otherwise the output file "SMDR" is well configured. check CLDFP; Is it on serial connection or on IP? -- Nithin

[thumbsup2] -- Nithin

verify Command "1008" on the trunks. Should be disabled. -- Nithin

Hi Buddy Did you already use this ethernet connection to NIU, or trying lately to access it?? Just one thing to check if you are trying it lately, Did you initiate the IO port for MML login?? If you are able to login through the serial ports, take a IODDP print. -- Nithin -- Nithin

Hi FCPLI Finally, not knowing what to do further.. New LIM is re-installed. and everything seems to work fine. Thanks for your support Nithin -- Nithin

Doktor I may be wrong in understanding your query but still thought if may help you... If you have used command like IONCI:IODEV=CIL,User=CIL-0,IP=a.b.c.d,RPORT=xxxx; then the system which is having the IP "a.b.c.d" should monitor the port xxxx. Usually the call accounting S/W monitors the...

Usually the SMDR port doesnt connect immediately. In XP, where fortunately Hyperterm is available, the "Wait for a call" just works fine. Frankly speaking, never tried this on WinFIOL and also WIN2008 server. -- Nithin

Hi FCPLI the dump and reload was only after copying the units. I have no clues about this and I just going by you. still the call log is not as it is on older LIMs. Thanks Nithin -- Nithin

Hi FCPLI I took dump before reloading ( was actually a scheduled one ;) ). the prints PCLOP:UNIT=KLP1D2,LIM=1; PCLOP:UNIT=KLP1D2,LIM=6; and PCLOP:UNIT=SLP60,LIM=1; PCLOP:UNIT=SLP60,LIM=6; are identical. dont know where I am missing.. :( Thanks Nithin -- Nithin

just to add... I guess they have included a command [license_status -s] to print the hardware ID.