Recent content by NinjaUK51

Hi there, We have a requirement to be able to send MF tones to an anologue station port from IP Phones. The analogue station port has a door entry system connected to it which will be programmed to go off hook and dial a hunt group number. When answered by an IP phone we will need to dial a...

Hi, We have a S8720 running CM5 with G650 PN's (C-LAN's, Medpro's, etc) and we would like to connect a SIP trunk into our telco. Our techy guy at the telco has said that we would actually be connecting into their Session Border Controller (which is an ACME Packet Net-Net) and then breaking out...

Guys, I am having a problem with setting up some Avaya 4610's using a Cisco 3750 switch. The issue seems to be that when a PC is connected into the ethernet port on the back of the IP phone it does not get an IP address from the DHCP server. If the PC is plugged directly into the ethernet port...

The network guys are rolling out a new QoS stategy and have requested that all control traffic be marked with a specific DSCP value. WE have S8700 with G650 at main location, a remote G650 and a S8300 LSP in a G700 at another smaller site. All endpoints are DCP and we are using IGAR to route...

Guys, If I change the DSCP settings for a particular Network region will the CLAN's, MedPro's and Handsets within this region need busy & releasing or reseting in order for the settings to take effect? (S8700 with G650's and a remote G700 with LSP on CM2.1) Cheers, Ninja

Hi Guy, I am installing 6 x G700 ateways into a single stack using X330 stacking modules in each and the supplied cables. Is there any specific configuration I need to do on each G700 so it knows it is part of a stack, or do I just configure each gateways (IP addresses, hostname, etc) and does...

Thanks, From what I have been told it is a single box solution (The MSS is going to be on the same box as the MAS). Does the solution therefore have these capabilities for backups built in? ie: without buying any 3rd party product can backups be scheduled to the DVD drive or alternatively FTP'd...

Hi Guys, Weare having a new MM system installed on our site ithe next week or so and I was wondering what the backup options are? Do we need to acquire a license for our corporate backup software (Tivoli) or do Avaya provide a means of backing up this box to tape/DVD/etc? Thanks Ninja

I have configured a 2.2 S8300 for NTP, although the servers time synchronises with the NTP server initially, the time then slips and does not appear to re-synchronise with the NTP server at regular intervals. Is this a known issue or have I missed something? Cheers, Ben

Brownstar, The patch was applied by our Business Partner so I'm afarid I don't know the exact details. Best bet is to take a look here (if you haven't already done so) or contact your Business Partner...

Many thanks, Is someone also able to tell me how many timeslots are available on the TDN bus between carriers in a G650 port network? Is this a consideration that needs to be taken into account or are these connections non-blocking? Many thanks.

Quick question, In a setup with an S8700 running CM 2.1 and multiple Port Networks consisting of G650's only containg "digital" handsets, is the Media Processor the limitation on the number of calls that can be made between each port network? and if so how mant calls can each MedPro handle if a...

Many thanks, port 1720 wasn't allowed through the firewalls, rule added and problem solved.

I am trying to setup an H.323 trunk between a S8700/G600 and a S8300/G700. I have setup node names, signalling groups, trunk groups, network regions as dsecribed in the documentation but when I try and sieze a channel on the trunk group and send digits I receive a denial event 1220. Does anyone...

Out of interest which manufacturer & model of power over ethernet switches has anybody deployed and can they provide feedback on reccomended products or switches to avoid? Many Thanks, Ninja