Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by nibarge

  1. nibarge

    Call Pickup - 3300

    thank you UKMitel - that solution works. So I guess it's a case of waiting for Mitel to release a fix. Once again, thank you.
  2. nibarge

    Call Pickup - 3300

    My Interconnect Restriction table is blank, so my assumption here is that all sets can communicate with each other ... is this not the case. Tried ending the dial string with a # and the outcome is the same, call is not picked up and I get unobtainable tone.
  3. nibarge

    Call Pickup - 3300

    I have a 3000 feature matrix, that shows a 5302 capable of performing call pickup.
  4. nibarge

    Call Pickup - 3300

    Newbie here who has recently had some admin training, but still finding my way around the system. So here we go … I have a 3300 and I’m trying to configure Call Pickup for each of our small departments. I have created groups and assigned the relevant ext’s number’s into these groups checked the...
  5. nibarge

    Possible to tell size of photoshop file before saving?

    thanks .. did use a search to try and find the answer before posting the question but must have missed this one.
  6. nibarge

    File sizes different why ???

    Please excuse this newbie question, but I have a picture with a size of 2.5mb, yet when I open it in Photoshop it appears to now be 18MB ... why such a big increase ?????
  7. nibarge

    5302 IP Phones "dead"

    thank you all for your help ... the untagging of a port has fixed 5 of my phones - 6th phone just refuses to register (I have even tried a new phone and this won't register against this DN either ), so it's back to my third partt support for that one, but once again a big thank you for helping...
  8. nibarge

    5302 IP Phones "dead"

    Windows 2003 for the DHCP server.
  9. nibarge

    5302 IP Phones "dead"

    I believe that my problems are related to my DHCP settings ( even though I have 35 or so other 5302 phones working ), but I'm unable to get these 6 rougue ones to connect .. phone goes through the flashing lights sequence and appears to hang at the DHCP discovery stage. Below is the string I...
  10. nibarge

    5302 IP Phones "dead"

    Thanks for the reply, but unfortunatley I do not have access to Mitel on-line .. how do I go about gaining that access ???
  11. nibarge

    5302 IP Phones "dead"

    Hi .. I have just had a Mitel 3300 system installed ( not sure of OS release but assumption is that it's the latest ). When testing last week, all phones were working, yet during this week, several 5302 handsets have stopped working and go through the flashing light sequence, whereby I'm...
  12. nibarge

    SMS 2.0 Console Error

    Help .... I have installed the SMS console onto my XP SP2 machine, and I get the following error when trying to open the collections section ..... _com_error exception in MMC Admin UI! Description: Factory Enumeration Failure HRESULT : 0xEEEE0001 File ...
  13. nibarge

    Server Slow Down

    slow response times have been rectified by hard setting the network card speed to be 100MB FD and also the hub port to be the same. I have d/l the Update Express 2 utility from IBM's web page that I hope will update any old drivers that I may have installed. Will post the results later today.
  14. nibarge

    Server Slow Down

    Bios has been upgraded
  15. nibarge

    Server Slow Down

    IBM Xseries 250 server 2 700 PIII processors 4GB mem Recently wiped this box, was running NT4.0 SP6a fine, insatlled W2K, and now Orcale has slowed right down. Have checked the event viewer and I get an information alert telling me that the processors are not of the same revision, plus I'm also...
See more

Part and Inventory Search

Back
Top