Recent content by niallo32

I have Brightstor Arcserve 9.0 Build 2052, installed on Windows 2003 Server SP1. When I try and Mount/Inventory or any other commands from the Device tab, a message pops up saying that 'The Device is offline'. I shut down the Tape Drive & Server, started the Tape drive, waited for it to...

Thats fine thanks. Should I change the address of the second Router?

For info, the DSL Routers are Netopia Cayman 3346 The two Switches are Bay Networks Base Stack 303 & Netgear 24 Port Stackable Fast Ethernet Switch. Should the Uplink Port I'm looking for, be labelled 'Link'? Thanks...

So do I change the Internal address of the second router to 192.168.1.253 or something similar - via the config page? The just connect a CAT5 cable from Uplink on Switch 1 to Lan port on Switch 2 and plug the four new pc's into Switch 2? Thanks..

You are my life saver as usual. So to clarify: Existing setup stays as it is - static IP's (192.168.1.1 - 192.168.1.8) First Router = 192.168.1.254 New Setup has statically assigned IP's (192.168.1.10 - 192.168.1.15) Second Router - Do I change the IP address to 192.168.1.253, for example...

I have eight client pc's in a warehouse all on a CAT5 backbone. I have one DSL connection patched into a switch, and all clients are patched into that switch - all have internet connectivity. All clients can share files and printers. All clients have static IP's - 192.168.1.x I have a second...

Thanks a lot for that - will try it tonight

I have an XP SP2 pc - need to resintall the OS - if I choose to reinstall without formatting, will all my existing data stay as it is? Will my applications, such as ITunes? Thanks

I have a system error on bootup. I have the fix from Microsoft - I need to extract a file from the XP cd, from the Recovery console. When I boot up the XP CD, select 'R' for a repair installation, then select which installation it is. It then asks for the Administrator password - I left it...

I'm waiting three weeks though!

I was thinking that myself alright. Thanks to everyone for the suggestions.

I ran a tool to remove Group Policy for the currently logged on user - made no difference. Repplied GP and still no difference :(

I tried the relevant ones from here last night - no joy unfortunatly. It says that 'Active Desktop has been restored' etc - still doesnt work

No, when I Windows + D, any open windows are minimised, but it still wont allow me to RC the desktop and select the required setting

It does indeed.