Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by Newsworthy
-
Restoring system to smaller disk
We wish to restore our OS to a smaller disk configuration. We have a Proliant with several disk arrays. We made the mistake early on of putting the system on too large a logical drive consisting of several physical drives. Basically our C: drive is 138GB (8 physical drives), of which we are...- Newsworthy
- Thread
- Replies: 0
- Forum: Data Recovery
-
Booting from a disk other than c: on Proliant 8000
TheLad, we have a Smart Array 4250ES Controller in Slot 10 with three arrays. Array A is the current C: drive, Array B is the E: drive, and Array C is the G: drive from which we want to boot the OS. We also have a Smart Array 532 in slot 11, but there are no drives in it. We don't recall...- Newsworthy
- Post #5
- Forum: Servers
-
Booting from a disk other than c: on Proliant 8000
Thank you TheLad, but I have not been very clear. We have a C: drive (first drive array) with W2K3 on it, an e: drive with data, and a new G: drive (third dirve array) that also has W2K3 on it. We need to boot from the G: drive and make that our OS drive for several reasons. We did not think...- Newsworthy
- Post #3
- Forum: Servers
-
Booting from a disk other than c: on Proliant 8000
How do we boot from a disk drive other than c:? We have a Proliant 8000 with three configured arrays. We have installed Windows 2003 on drive "g:" and we believe we have properly configured it to be bootable. How do we boot from a drive other than A:, C:, or D:. Which seem to be the only...- Newsworthy
- Thread
- Replies: 7
- Forum: Servers
