Recent content by NeoMatrix835

Thanks alot for the help. :) I got everything up and running just fine now. The problem ended up being something awkward with the network topology and a DHCP server.

Thanks for all the help :) However, I am still running into some problems. The following I did get to work by itself: static (inside,outside) tcp x.x.x.80 11111 192.168.0.180 11111 static (inside,outside) tcp x.x.x.80 11112 192.168.0.180 11112 static (inside,outside) udp x.x.x.80 11111...

Actually I entered static (inside,outside) tcp x.x.x.80 11111 192.168.0.180 11111 netmask 255.255.255.255 static (inside,outside) tcp x.x.x.80 11112 192.168.0.180 11112 netmask 255.255.255.255 static (inside,outside) udp x.x.x.80 11111 192.168.0.180 11111 netmask 255.255.255.255 static...

Woops, Yea I actually did type in the port in both spots.. in my haste while typing the thread I must have missed it.

When i was testing the configurations I entered I was able to see the access-list hit count increasing for the corresponding item. So I believe the IP range I was given is valid. However, I am still unable to hit the PCs behind the firewall. If I attempt to access them locally I have no...

Really looking for any advice that might be helpful :)

Hello, I am new to configuring this kind of equipment. I have a PIX 515e with 3 PC's behind it that I need to open up access to for PC Anywhere. I plan on using non-standard ports for data and status for each of the 3 different PCs and have three IP addresses I can use on the external side of...