Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by Navaldis
-
Linksys BEFSX41, VPN..What am I doing wrong?
All I can say is welcome to Linksys hell. I've got a good connection on the go but am unable to access any subnets at my corporate office. Local subnet is just fine but if I want to go to another location it's just a no go. Tried various routes but just will not go. I might have to do...- Navaldis
- Post #23
- Forum: Virtual Private Networks (VPN)
-
Linksys BEFSX41, VPN..What am I doing wrong?
I know you have solved your problem but... This would have worked for if you had done two things. 1. Seems like you used the same local secure group for all of your tunnels? You would have to use different subnets in your local subnets for each tunnel... Tunnel 1: 192.168.1.0 Tunnel 2...- Navaldis
- Post #21
- Forum: Virtual Private Networks (VPN)
-
Windows 2000 SP3
I have had one weirdness on one server. After upgrading I have received the following error message after I load the Event Viewer: Unable to complete the operation on "System Log". The interface is unknown. Similiar message when I try to start IIS: Could not start the World Wide...- Navaldis
- Post #11
- Forum: Microsoft: Windows servers
-
Linksys BEFVP41 VPN problems
Looks like I'm going to have to look at the SonicWALL or other such device for certain locations. The Linksys certainly will do the job for some of our smaller locations in which it is not necessary to "see" the other subnets. Thanks to all who replied and please keep us informed of...- Navaldis
- Post #185
- Forum: Virtual Private Networks (VPN)
-
Linksys BEFVP41 VPN problems
I too like the Linksys VP41 router. However, I am disappointed that it is not possible to route between subnets on the unit. It would be nice if people working from home could see our entire network and not just the subnet in which they have established the VPN link. Has anyone had any...- Navaldis
- Post #179
- Forum: Virtual Private Networks (VPN)
-
Linksys BEFVP41 VPN problems
Hey markku. Thank you for you reply. I'll review the issue as this thread is rather long. I have a tunnel between two subnets 10.0.100.X and 10.0.10.X and everything is dandy. However, I can't see any subnets which are connected to the location at 10.0.10.X (10.0.25.X for example) from the...- Navaldis
- Post #173
- Forum: Virtual Private Networks (VPN)
-
Linksys BEFVP41 VPN problems
Has anyone had some experience in routing to additional subnets besides the one that the BEFVP41 is connected. I have two locations which are connected via VPN and it works perfectly. The remote location is 10.0.100.X and our main location is 10.0.10.X. The remote location can see everything...- Navaldis
- Post #168
- Forum: Virtual Private Networks (VPN)
