Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by NathanA

  1. NathanA

    IPphone over VPN

    If UNIStim does not like being NATted, I think OP's only option is to change VPN clients to one that supports "true" tunneling mode in IPsec. I read through the Shrew docs, and they are very light on details, but as far as I could tell, even though it supports "tunneling" mode, as far as Shrew...
  2. NathanA

    IPphone over VPN

    How did you manage to "bridge" the NIC port to the VPN? That's typically not possible as IPSec (which is what it sounds like you're using as your underlying VPN technology) doesn't encapsulate ethernet frames. What you are probably going to have to do is enable Windows ICS (Internet Connection...
  3. NathanA

    BST Doorphone, can't call across network?

    Reading through the manual seems to imply this is not possible. I assume you have already tried setting Prime Line for the doorphone DN to the line pool you want to dial out of (whichever pool dest code '7' is tied to) and then setting Call DN to the target DN on the remote system (omitting the...
  4. NathanA

    SIP trunk reservations for multiple peers

    Working on a BCM50 running 6.0.2.05.237. It is licensed for 4 SIP GW trunks; all 4 SIP trunks are in pool BlocA. We already have SIP trunking working perfectly between it and another BCM. Now I want to peer it with a second remote system, also via SIP. This was relatively straightforward and...
  5. NathanA

    T1, dial-tone, "line in use"

    So here's a weird one. I've already found a workaround for it, but I don't understand WHY it's necessary or what is going on. (At the very least, even if I don't get an answer, I hope this might help someone else who is struggling with the same or a similar issue.) As I've written before...
  6. NathanA

    NAM Auto Attendant: Lines vs. DIDs

    Oh my word...I am an idiot. Thanks for pointing out the obvious to me. :) -- Nathan
  7. NathanA

    NAM Auto Attendant: Lines vs. DIDs

    Pretty sure I know the answer to this already, but figured there's no harm in asking... Per previous post of mine, we're migrating from analog trunks to T1 on MICS 4.1. We also have NAM 4.0. Currently, the AA is set up to answer after 4 rings on some lines (to give live receptionist time to...
  8. NathanA

    DTI in fiber trunk module

    Thanks, that's what I needed to know! -- Nathan
  9. NathanA

    DTI in fiber trunk module

    Hey guys, thanks for the responses so far! Yes, I already understood that I'll need either NTBB24 or NTBB25 in order to supply the DTI with a clock source, and yes, I also understood that if installed off-core it has to be in a M12X0 by itself and needs to be in the first slot. To clarify, I...
  10. NathanA

    DTI in fiber trunk module

    Hello! We have an MICS cabinet running 4.1 software with several analog trunks that we would like to add a T1 trunk to. Eventually, we plan to only be using the T1, but would like to be able to use both the analog trunks and the T1 side-by-side in the interim. Both the main KSU cabinet as...
  11. NathanA

    Nortel VMI (NT8B89DA-93) analog FXS ports not functioning

    Hah, I wouldn't bother holding your breath. -- Nathan
  12. NathanA

    Nortel VMI (NT8B89DA-93) analog FXS ports not functioning

    I need an ATA with disconnect supervision and DTMF passthrough which will be connecting to an analog FXO port on an Asterisk box which will in turn be terminating a remote VoIP handset. The idea is to have a remote phone that has an internal office extension/DN and to use IP as the...
  13. NathanA

    Nortel VMI (NT8B89DA-93) analog FXS ports not functioning

    VMI programming: I reset both digital ports on the VMI to default values (F9XX -> VMI Admin -> Next -> DN # -> Next -> Feature Table -> Clear -> Default Data? -> Yes). DN programming in the KSU: as directed by the VMI manual on page 3-3. -- Nathan
  14. NathanA

    Nortel VMI (NT8B89DA-93) analog FXS ports not functioning

    Hello all, Long-time listener, first-time caller (hah, no pun intended...really). Got an MICS 4.1 system we need to hook a VMI up to, which we will be using as a 2-port ATA. I bought one off of eBay that was supposedly pulled from a working phone system last year and then sat on a shelf for...
  15. NathanA

    Hi All, I am relatively new to P

    I have been this route! 1) Install Activestate Perl 2) Run the installer for the 8.1.x client cd. 3) Install it all or at a minimum the Oracle 8 OCI 4) From a dos command line type PPM This puts you in Perl Package Manager. From this point you need to install DBI then...
See more

Part and Inventory Search

Back
Top