Recent content by napoleao

problem is fixed thank you. The problem was in the routing of the ISP Router that has the IPsec VPN, once the routed was created manually the problem was fixed.

The configuration that I am going to say was not done by me, the only think I did was to create the IPSec VPN between both Sites, and that goes up. The IPSec VPN is done in the ISP Router in both sites (Watchguard and PepWave) The problem is the following. Site A can ping Site B Cisco Router...

thank you very much. After changing the order is working fine.

yes,each vlan has switch gw .251 192.168.100.251 192.168.101.251 and so on.

Hello, I have created in our switch core the below access list. access-list 100 permit ip 192.168.100.0 0.0.0.255 any access-list 100 remark --[Allow Guest DNS requests to DNS Server]-- access-list 100 permit udp 192.168.100.0 0.0.0.255 host 192.168.101.2 eq domain access-list 100 remark...

if i change to in, all vlan stop having internet, and even with "in" using the public vlan i was able to access the server vlan. Really dont know what is wrong.

Hello, I have a network with three VLans, vlan2 is users, vlan 20 is server, and vlan 21 is public I want vlan 21 to be isolated, from this vlan it should not be possible to access any device in vlan 2 and vlan20. I have addeed this access list to the switch but i can still acess the devices...

Hello, Is there a way to see if some administrator, has given "full Access Permission" to a mailbox to read emails, and then has removed that access? thank you

I have a mailbox that has 15gbs , but I have archieve to a PST all emails until Dez 2014, and in the outlook the mailbox show that it only has 300mbs, but in the Exchange console it says the mailbox has 15gbs, is there anything I need to do so Exchange console knows the real size of the mailbox...

If possible can you point me where to do that please?

Hello, sorry was away for a week, I dont want to be a dynamically learning proxy, I just want to use the Watchguarg HTTP & HTTPS Proxy but I want to allow everything for now. thanks

How can I allow access to any site using HTTP Proxy without denying/banning any site? Basically We want to know first all sites that are being accessed and have that sent to the Watchguard Report Manager. thanks

thank you very much tlpeter for your tip. It did work perfect now.

thanks, I have changed the configuration, I will wait until someone is in the office to test.

different group, I will keep troubleshooting, as I dont have anyone there at the moment to test with me. thank you for all the tips.