Recent content by n1k05

Hello, i'm having an ip500 system and a win XP pc with TAPI drivers installed. I'm also using julmar's TAPI soft phone (http://www.julmar.com/tapi/) to handle an extension. Call park is ok, but when i unpark call i don't get any call info like call state, caller id, called id and other, although...

Hello again I used the announcement thing but the problem is that the first caller listens this announcement. I would like the first caller to hear the normal ringing sound but a second caller would hear the announcement directly. it is written in the help file that For IP Office 4.0+, hunt...

Hello I have an ipo 500 with embedded voicemail. The customer wants when he talks to someone, the second call to hear a message that all lines are busy till the first call is finished. I tried the last ca reserved but they didnt like it. Is there any other way? Also, is it possible to increase...

ITS WORKING(only outgoing yet!!) TheTaker and Bas really thank you. Its working with none network topology,iproute 0.0.0.0,0.0.0.0,router ip,shortcode 4n,dial,4n,51[ars] and ars 4n;,dial,n"@sip1.voipbuster.com". I didnt try incoming yet because the customer was ready to kill me with all these...

i tried all the tips you sent me but in vain... i get all the time receivemessage bad request.Right now the it manager gives me internet access through lan1 and lan1 i use in network topology.So the problem becomes a network problem haha..If stun wont work for voipbuster why do they give an ip...

I guess it wont work till stun gives a result.. The company has a linux server for nat and firewall,in order to operate throuh nat in lan1 we need to direct all the traffic in 5060 port to the ip of the ipoffice right? Is there anything else considering nat configuration and firewall? Thank you...

oh yes the Taker it is the same issue

Hello im connecting through lan2 on a router with static ip and no firewall and nat.The lan2 has static ip as well.My short code is 4N DIAL N 51[4] and the ars 51[4] has the following short code N; DIAL N"@voipbusterip" When im trying to call i get this from monitor 473403mS SIP Trunk: 18:Tx...

i tried this N"@sip1.voipbuster.com" i tried this N"@sip1.voipbuster.com:user=phone" i tried this N"@ipadress" nop can you please explain why i can not see the digigs that i dialled ?

with this short code 4n n dial i get bad request...but at least i get a response haha

teluri was disabled,i create the short code as you told me and i m getting no rx messages now..no registration?Shall i create a short code at ars as well? Is it normal that there are no digits displayed in the to header? thanx for your prompt replies 100254331mS SIP Trunk: 18:Tx...

i ping the stun server from my computer with no response.Right now i dont use the stun thing at all and the line is registered succesfully (i get rx ok when i send tx register) Here is the monitor capture when im dialling 96314306mS SIP Trunk: 18:Tx INVITE Tel:+ SIP/2.0...

sorry... can not see the digits i dialled in the TO header

Hello all im trying to install my first sip line but in vain.My customer gave me a static ip and a router with nat and firewall disabled so im using the lan2 interface and none for network topology.I dont use stun (anyway there is always a blocking firewall and i cant ping the stun...

She wants to call external someone and when she hears the ring to transfer the call to her boss(reaally lazy boss MattKnight!!).Actually i dont know if you can transfer a line that is not already established, i mean she is not connected to someone to tranfer next....The opposite works really...