Recent content by MyHeadHurts

The DID's that I'm forwarding are Phantom's. Here is the setup of one of these phantoms: DES TN 064 0 02 12 PHANTOM TYPE 500 CDEN 4D CUST 0 DN 2153 0 MARP AST NO IAPG 0 HUNT 91XXXXXXXXXX TGAR 8 LDN NO NCOS 5 SGRP 0 RNPG 0 XLST SCI 0 SCPW CLS CTD DTN FBD XFD WTA THFD FNA HTA ONS...

BigIndian...I don't understand your reply. Could you elaborate a little more?

Presently I have numerous DID's that I am forwarding to outside numbers. I would like to know if there is a way to pass through the actual calling party number on the call forward rather than having the forwarding phone CID show up.

Thanks for replying guys. I did some further checking in the threads and saw how to look at the CLID info and what other people had in theirs. These are the threads that actually inadvertantly helped me get to what I wanted to do: thread798-1251086 thread798-1268532 Turns out I had "INTL 11"...

I have recently run into a situation where I can no longer call to a particular country internationally. I can call many countries, just not this one. I opened a trouble ticket with the carrier to do some call traces, and they are saying that issue is because my calling # is showing up with a...

I'm attempting to create a backup server for CallPilot. In the section in the Adv Admin man, it states I'll need the MAS CD. I have many CD's but can't seem to find this one. Is the title on the CD as shown on the screen shot in the manual..."Meridian Application Server" or something else? If...

Thanks for the info! That's exactly what I need to do. I knew I could do this also with a 4 port serial V.35 and a channel bank I have that would do the serialization out to individual V.35's, but wanted to cut down on the cabling as you might have guessed. Thanks again. I'll look into that module.

I would like to use a 3620 (12.0 IP Plus) to create muliple PPP connections coming in on a single T1...ie channels 1-4 would be a 256K PPP......5-8 another 256K doing PPP..etc. Now I've done subinterfaces when doing Frame and ATM, but I have never seen (nor know what module actually supports)...

Thanks. It turns out that it is a security rules issues between the CallPilot (NT Server) and the new array. My IT guys made a seperate machine for me with just Win98, and CallPilot was able to push the backup to it, so we will need to figure this piece out, but for now at least I have a recent...

I had this problem as well. I have an Option 61C with CallPilot. I had to have my vendor load some patches into both the switch AND the voicemail to make it stop. It is a known problem by Nortel, and the patches did fix the problem. Problem is it costs money to have a vendor come in to load...

Our backup array died about a month ago, and we have moved to a new backup array. Long and short of it is even though I've changed my backup device info to point to this new array, I have been getting the following error since the backup is failing: The backup/restore of...

Thanks for the info NTOldTimer. I just looked up my present timing options, and it just so happens that my primary clock is LOOP 2. That's a good start. One less thing to have to do. BMiles2000, I asked the person handling the PRI/BRI IAD what protocols it can support, and he said that it does...

I just setup a drop & insert app in an Option 61C for a video/wideband audio application. There is a local service provider PRI that provides the DID's for the app, as well as it's present use of user DID's. Certain DID's are sent to another PRI in the 61C via Steering Codes that drop these...

Thanks for the headstart/pointing me in the right direction freddog. I'll give her all she's got capt'n. I'll definitely post back with questions I might have while I'm trying to get this work.

Yes the end PRI equipment can emulate a switch. It's a CTI server with PCI PRI/BRI cards. I also have both the X11 Software Features Guide (3 books) and the Networking Features manual (4 books). Do I need any special software feature/networking options in my software load? If so, what would...