Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by MWillo

  1. MWillo

    Landscape printing on RH 8.0

    You may want to look at LPRng and IFHP filters to get landscape printing working. I'm affraid I don't have a definitive howto on this but the following site is quite helpful http://www.lprng.com/ Hope this helps and good luck, it took me a while to be able to use many of the -o options i knew...
  2. MWillo

    RedHat 8.0 finds too many cpu's

    Thanks for your input, I'll let you know the outcome
  3. MWillo

    RedHat 8.0 finds too many cpu's

    I apologise in advance for the rather lengthy question After installing RedHat Professional 8.0 on a Compaq Proliant ML370 with dual Xeon processors, we have a problem where the server will stay up for about 2-3 hours and then freeze completely. Version info Red Hat Linux release 8.0...
  4. MWillo

    Printing to a serial device server which does not support lpr

    Thanks Tony, It will be a few days before I'm back at this site to try this but, I can follow the process now. I'll let you know the outcome. Thanks again for your help Regards Mike Willoughby
  5. MWillo

    Printing to a serial device server which does not support lpr

    I am trying to print to a Star TSP400 serial barcode printer via a lantronix UDS-10 serial device server. Lantronix support have told me that the UDS-10 does not support lpr or any of the other standard printing mechanisms, and the only way to send a job is via the ip address/tcp port...
See more

Part and Inventory Search

Back
Top