Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by mustang971

  1. mustang971

    Not Fowarding Correctly

    I have a customer with a 9600 that just needs me to change x2851 from forwarding to vmail to now goto a different extension instead. I have deleted the forwarding for all conditions (used to goto DSTNO 0 = 3000 = pilot of v.m.) now I assigned DSTNO 18 = x6918, and changed the forwarding...
  2. mustang971

    Weird one from storm possibly?

    Had major storms last night, now a customer with an MICS 7.0 has half their phones down, and when I call in and check the port it says deprovisoned (yes it is a STATION port not a line port) Other ports one same card are fine and say enabled and m7310 for them but the ones affected say...
  3. mustang971

    Phantom Button

    Its set to ring like all the others, to get her by I just gave her a pick-up button instead for now. But all programming is EXACTLY the same as all the others that DO work. Wether I check via laptop or telephone programming. I moved her port, tried different phones, etc. As soon as I do change...
  4. mustang971

    DCC Card or Modem Prob?

    I can't find the command to disable alarm reporting on that DCC port.
  5. mustang971

    Phantom Button

    Have a customer that has a KXTD1232 with a TVS225 vmail. The auto attendant answers all calls, when the customer dials "0" it rings Phantom extension number 8000. There are several people thta have a Phantom button that rings at their extension. (everyone answers the operator calls) I have one...
  6. mustang971

    Door Opening Controller

    I use that site all the time also, but no D.O.C. pdf there either
  7. mustang971

    Door Opening Controller

    Hi all, installed BST Door Phones before, however cannot find the pdf file ANYWHERE for the DOC itself (door opening controller) I have the doorphone docs just not the controller docs, anybody got a pdf on it?
  8. mustang971

    Meridian Mail with Wyse-150

    Thanx John, yeah I use hyperterminal on my laptop 99% of the time however we also have terminals at some sites still. Thanks for the tip.
  9. mustang971

    Meridian Mail with Wyse-150

    Have a WY-150 terminal setup for system maintenance, however when I do the AX command it does switch over to the meridian mail, however the terminal doesnt print it out right, it's like it doesn wrap the text or something, so I can't do anything but the key to get back to terminal. It just...
  10. mustang971

    Finding provider of SPECIFIC number

    Thanks all , we finally figured it out, yeah I know what you mean about the LPN the numbers are so partitioned now, if it isn't live where your at then it's like pulling teeth to find the LPN.
  11. mustang971

    Finding provider of SPECIFIC number

    I have a customer that wants order a specific phone number, however the main local providers here all say that they dont own that number. I thought I had a web site at one time that you could type in the telephone number and see who owns it (carrier) any suggestions? Remember we dont have the...
  12. mustang971

    Norstar Star Talk Flash Directory

    Had a few people tell me it couldn't be done but I thought I would check here. On the Star Talk Flash, I have a customer who would like the directory to be first name. I was told last name was ONLY option on the star talk flash. I have on other voice mails (not norstar) been able to just put the...
  13. mustang971

    Star Talk Flash DIrectory

    Had a few people tell me it couldn't be done but I thought I would check here. On the Star Talk Flash, I have a customer who would like the directory to be first name. I was told last name was ONLY option on the star talk flash. I have on other voice mails (not norstar) been able to just put the...
  14. mustang971

    DCC Card or Modem Prob?

    I have a 9600 with 2 DCC cards (4 dcu ports) 1 is used for on site miantenance and smdr, the other is used for v.m. integration and remote maintenance. The problem recently has been that sometimes when I remotely call in, it locks up the port and then the system shuts down that DCC card and then...
  15. mustang971

    Emanager Problems (WBEM)

    sorry wrong forum
See more

Part and Inventory Search

Back
Top