Recent content by mundell

Whats the best piece of equipment to use to do a vpn connection over the web. Example can I take a Linksys BEFVP41 and do a vpn connection to another BEFVP41? Or is Linksys not the way to go? I dont want to have a vpn router at one end and pc's connecting to it from other end I want router to...

Hey I am trying to rate limit couple ports on a Cisco 2950 48 port switch. I have setup a service-policy using the QoS but problem I am running into is can only restrict the input. I have to restrict gig port and min. restriction I can do on gig port is 8mb and I need to restrict down to 1.5mb...

No idea's???

Got a question I have a Cisco ubr924 wanting to use the VOIP ports got a buddy that also has same modem is there a way I can configure our routers to call each other by ip and talk using the VOIP ports? Don't know if should use MGCP or SIP or what protocol and not sure on how to configure it to...

I am looking for a way to Disable certain ethernet ports on a Linksys 8 port router or 4 port either one is there a way I can get into the router and disable lets say ethernet port 3 on the switch and then be able to go back in later on and re enable this port??? Want to be able to save time...

I am trying to do rate limiting on a port using Qos but not having much luck here is what I have can you tell me why it does not restrict link to 1mb? I tell no difference with this on the port. Config class-map match-all 1024 match access-group 1 ! ! policy-map 1024policy class 1024...

Need some help here. I have a Cisco Catalyst 2950 with Rate Limiting option but don't know how to use it. I would like to restrict a user on a specific port down to 1mb instead of getting the full 100mb connection I tried setting the bandwidth option on that port down to just 10kbits to see if...

Hey I am running that Mandrake single firwall edition and I am trying to VPN to a outside source but the firewall will not allow me to do this. I thought I opened the port up but it does not seem to make any difference the port is 1723 right does anyone know how to make this work? Thanks Robb

Ok need some help here I just setup a VPN Server got everything setup ok at least I think. I connect with my laptop I get the 192.168.1.2 on my laptop which is correct then i should be able to ping a > 172.28.254.254 ip address but it only let me ping the 172.28.254.235 which > is the local ip...

I am trying to setup a VPN Server on Redhat Linux 7.3. I am having alot of problems for some reason. Here is the instructions I am trying to use but having problems. ##download and install kernel source from www.rpmfind.net wget...

Hello Everyone, I am needing to make a cron job so that I can have my Redhat Linux 7.2 server everynight at certain time do tftp to a ip then do a put command to send file to a windows server what command in a cron job would I need to do this I have tried couple different things dosn't work...

Got a question for anyone out there today my friend and I where playing with terminal server we have a lexmark laser printer on a print server and we have a computer sharing this printer. Now we are trying to make it so that when a user logs onto teminal server it will add this printer well the...

Hello everyone need some help here I ran into a problem that some of my client computers using Terminal Server will not add there local printer so they are not able to print but majority of my client computers adds them fine the ones that does not I can not find out why everything is setup the...

only problem is I can't get in to safe mode either just dos prompt? I noticed there is no autoexec.bat file and the config.sys file is at 0 kbyes? and some how there is now command directory under windows.. All this happened just trying to install a dial-up networking connection we don't know...

I am receiving this Error when I try to boot computer will not let me into Win95 through safe mode or normal mode here is what i am geting first pops up a error saying can't find ndis.vxd file error then you hit enter and this comes up While initializing device IOS Error: an I/O subsystem driver...