Recent content by mt6322

We just received our srst enabled router and we are in the process of configuring our remote site. Will let you know how it goes.

Thanks again for your prompt response. I found the Cisco Unified SRST docs and I hope this will guide me through with my setup. I am gathering all the info I need to get ready in setting my call manager and the router. Any additional info will be greatly appreciated. Thank you.

Thank you for your response. I guess the sample configuration if for the Cisco 2811 router for the remote site. How do you create the calling search space and route patterns for local and long distance calls at the remote site ? We want to setup the Cisco IP phone at the remote site to dial...

We are adding a remote site using a Cisco 2811 with SRST for 15 users to our existing Cisco Call Manager 4.2 at our main HQ. The two locations will be connected via point to point T1. Also, the remote site will have its own PRI ISDN for DID numbers and for local and long distance calling. We...

This site will help me a lot. Thank you.

I do not have the CCMA DVD. I have to search for any Symposium CD and doccumentation that I have in the office and hopefully find the information you have provided above. Thanks a lot for your help and time.

Thanks for you response. I do not mind overwiritng the user information in my new server as long as I can restore all the user defined reports and user created graphical display on my exisitng web server. Could you please tell me what directory and files do I have to import from my existing Sym...

I have created all the users/access/partitions/report groups from an outdated Symposium Web Server box to a new one. Users' access to the new box is working properly except for the graphical display/historical reports that they have created in the old box. How do I move (what file to copy )user...

Upon further checking using the MSGO and MSGI messages on the D Channel I discovered that the problem is only affecting forwarded calls to the 202 area code. Here's what is happening; When an extension on the Cisco side is forwarded to a 9.202.xxxxxxx number and a call originates from the...

To clarify: The call is not going in and out on the same tie trunks. ng The call originates from the Merdian PBX via the QSIG PRI tie trunks to the Cisco Call Manager and then out on the PRI local/LD trunks on the Call Manager side. The two sites have 4 digit extension Coordinated dialing...

I have an Meridian Option 81C Suc 3.0 on one site connected via PRI tie line to a Cisco Call manager using QSIG on another site. My problem is when an extension on the Cisco Call Manager is forwarded to an external number, the caller from the Meridian PBX side hears a busy signal. The tie line...

I have a Meridian Option 81c Suc 3 connected via QSIG PRI trunks to a Call Manager 4.0 with Unity voicemail 4.2. How do I program the Meridian system so you will be able to enter #xxxx from any Meridian phone and send these digits over the tie lines to the call manager. Cisco phones connected...

Any advise please ? Your help will be greatly appreciated. Thanks.

Thanks for your response. Here's TNB on 8. REQ: prt TYPE: tnb TN 8 SCH0121 TN ! >err sch0121 > SCH0121 Loop not specified in configuration as terminal loop. Severity: Info

Here is my CEQU MPED 8D TERM REMO TERD REMD TERQ 001 REMQ SUPL 004 012 SUPC SUPF XCT 002 016 TDS * 002 * 016 CONF * 003 * 017 MFSD * 002 * 016 DLOP NUM DCH FRM TMDI LCMT YALM TRSH TRK 000 24 D4 NO AMI DG2 00 018 24 D4 NO AMI DG2 00...