Recent content by msimone

Hello all - I've been a lurker at Tek-Tips for a short while, but usually on different forums, so I apologize if this is the wrong forum for this post. Please be gentle:) The company I work for has three small branch offices all about one or two hours from our main office. Our president...

davcom1 - My boss has similar ideas, I can share what I've learned and hope that helps you. I've tried TrackerCam (www.trackercam.com) which lets you connect to the ip address and/or network name (iirc), put in your password and pan/tilt/zoom the camera, but is not free, so if you don't...

NTesla - I have started a similar project for my company, but I've tried a few different things. Hopefully, you will be able to learn from what I have suffered^H^H^H^^Htried. You will probably need a static public IP address at the site with the cameras, unless you do something where the...

Bcastner - Thanks for the pointer! I had checked the FAQ, but obviously I was not paying good attention. I finally got her pc back on the web, updated the AdAware and got her machine cleaned up. I got some 'Entry Point Not Found' errors when I first restarted after the WinSockFix ran, but a...

Robert12345 - If you reload the page does that help, or is it just certain pages all the time? Sometimes, especially if the image is coming from a different site than the main page, you can just time out and not load the image. Alternatively, you may be set to not load off-site images in...

Hello All - Our network is running on W2K Server, with (mostly) XP Pro clients using DHCP. One XP Pro machine has suddenly become unable to get an IP address via DHCP. As a temporary solution, I assigned it an IP address outside the normal pool, and manually entered the DNS info. It could...

Omnicef - You might want to try re-creating the form. Even if you just put in all the same numbers, but change the name of the form, it might clear up the problem. Good luck, Mike Simone

kgauvin - May I ask why you used the MAS200 server as an AD server as well? Was it because you only had the two machines and need the 'backup' AD server? Mike Simone

drdebit - Humor is always a good thing. Mike Simone

Replying to myself here - Just in case anyone else has similar problems, I recreated the form to no avail. I had to reboot the servers to install a new UPS. Afterwards I tried the printing again, just to see. It printed the new forms perfectly. I haven't tried the old forms, mainly becuase...

drdebit - Disclaimer: I'm no AD guru, so you shouldn't make any enterprise decisions on what I'm saying here. Active directory is kinda-sorta like the Windows Registry, but for your whole network. It tracks evrything on the network, who has access to it and how much, etc., etc. All of the...

Hello All - We use MAS90's AR Invoice History Printing to print out confirmation invoices to pre-printed forms (roughly 4" high by 8" wide) on a dot matrix printer. However, this week it has started acting up in a very strange way. On every third invoice the printer does not move...

jmccall - We have W2K Server running AD on a separate box from our file & print server that runs MAS90. As I understand it, the issue isn't so much one of performance per se, but rather that only members of the domain admins group can access files on a server running Active Directory. This...

meekobiscuit - It's been a while since you posted this, but in case you haven't had any luck solving it, the M90SE129 file is in the MAS90 server's \HOME\SESSION directory. If you delete or rename it on the server, you can then re-start the workstation. Hope this was helpful, Mike Simone

Steve - Thanks for the info. I'll keep that in mind. Thanks again, Mike