Recent content by mrtimzo

Hi, we're using NBU4.5 in gig-ether environment. Not sure if you've tuned these parameters, but we've found that performance is indeed modulated with such tweaking.. (1) create /usr/openv/netbackup/NET_BUFFER_SZ text file on your NBU server and all clients, with content thus: 65536 (2) on...

Hi, Thanks for this suggestion. I've used the printer on a clean install OS, seems to make no difference to behaviour. Guess it is physical (belts?) as you suggest. Sigh. Many thanks for the suggestion. --Tim

Quick question, curious if anyone has ever seen this / any ideas about cause or remedy. I have a (cheapo) Samsung ML1430 B&W laser printer. Low page count (<5000 pages). Since about 5 months now, it consistently "stretches" anything that prints close to the top or bottom of the page -...

Hi, Thanks for pointing this out - for some reason I had convinced myself there were only 2 screws (not 4). Odd. Guess one shouldn't do this sort of work "when too tired" :-) I just completed the removal / replacement of parts from Donor to Recipient machine, and things have gone swimmingly -...

Hi, followup on this: silly question probably, but: -> InkLoader (ie, the place where you physically put the ink into the machine) .. has 2 screws near back L/R of unit. I can't see what else I need to be doing to release this plastic module in order to expose the "metal plate under...

Hi, sounds perfect - thanks for these directions WRT the PCBoard. I'll give it a go and let you know how things work out. --Tim

Hi, Thanks for this info. I'm "pretty sure" the problem is power-supply/control board related, b/c the problems began intermittently over a span of ~1 month, and in that time, error codes we could pull from the unit were all VERY consistent. During these times, the unit printed VERY nicely...

Hi, I'm just acquiring a "p8200 for parts" from ebay (current unit suspected to have damaged PS or PS Control board, diagnosed based on error codes, results in persistent Xerox logo @ power-up). Originally I had planned to swap out the PS and PS Control board into my current unit. However, the...