Recent content by mplana2

Hi, I have an existing S8300/G700 server connected/supplied by Avaya UPS (AC powered). If I purchase for a new G700 Gateway. Can I plug it to the same UPS where my existing s8300/g700 server is connected? So they will share on the Avaya UPS. Anyone there who can see if there will be problems on...

Is there a feature in avaya if let's say I make use of a certain authorization code not assigned to me and it will alert to my phone? this is a similar feature like crisis alert but then the difference is any called number as long as they have used other pin codes.

Hi JayNec, Thaks for the reply. After configuring all of it (adding addresses, setting mgc list, setting reset-times). Before adding a mediagateway in my main controller, do I need to issue a reset system 4 first or it is not necessary? I'll just add the mediagatewya and that's it?

Hi, We currentlly have an S8300/G700 (Main) located at 30th Floor and S8300/G700 (LSP) located at 26th Floor . We have rented another floor which is 15th Floor and we need to add another G700 media Gateway (only) for installing media modules (since the 2 media Gateways above is full) and also...

Hi, We are currently running G3si V10 and we are on the process on installing an ISDN-PRI line (30 channels). what I think what I just need to configure is configure the DS1 card (add ds1 xxxxx), add a signalling group for the D-channel and create the trunk group. but I read on one of the...

Anybody there who can help me with this setup? Thanks

Is there someone who can help me setup our trunk group (ISDN). First is we ordered an ISDN E1 There are no DDI numbers attached to PRI. only one main calling number. how can I configure it wherein I will be able to route it to a vdn number. because the pupose of the line is to have a calling...

Is there someone who can help me setup our trunk group (ISDN). First is we ordered an ISDN E1 There are no DDI numbers attached to PRI. only one main calling number. how can I configure it wherein I will be able to route it to a vdn number. because the pupose of the line is to have a calling...

Hi kevin thank you so much, I'll rely to the link you've given. btw. I'm not adding another CLAN. I will add a new CLAN since we don't have installed yet. In our setup on the connection of our CMS to the PBX we have a two data modules 1 is using PDM type and one dat module for processor...

Hi Kevin thanks for the reply. Just want to ask after doing this procedures 1. Insert new C-LAN into cabinet slot. 2. Put network amphenol adapter on same slot. 3. Run ‘cha node-n ip’ A. Type in C-LAN Network Name and IP 4. Run ‘add ip-in (board location, i.e. 01C12) A...

Hi, our CMS server (V9) is currently using an X.25 connection. All are configured properly (data module, commm. interface links etc.). Now we need to change the connection using a CLAN card. I already know on how to administer the CLAN card but can anyone help me know the procedures in disabling...

Hi, Currently, I am doing a traffic analysis in my trunks but I cannot find the retrial capacity table based on the avaya library. Can anyone send me a link on where can I find it, or anyone who can send me the table. Thanks in advance