Recent content by MontrealSoft

You’re close ! Miscou Island actually! System worked perfectly before the programming was erased by successive power failures (bad ups). So the lines do have that option. I will have to look for line supervision, yet I do remember doing that programmation on line 1 before copying to all the...

Ok. More info User at 221 can get an outside line using pool a. She press intercom 9 and gets an outside line right away. But if she wants to transfer an active line, as soon she click transfer then 8 or 9, she gets « transfer denied ». Allow redirect is ON on that set. Is there a...

Set 221 now n english Error is transfer denied. And it only makes this when transferring to a set that redirects to a cell phone. MontrealSoft.com http://www.montrealsoft.com

Pool A code to get ext line is 9 and permitted for all sets. Route is used code 8. If ser at set 221 calls ext 245, the system uses a line and ring the appropriate cell phone. But if same set tries to transfer an active call to 245, it doesn’t work. I can ask the user to set its set...

Yea. And it’s Eva led on all sets that need the forward, even on the 221. Otherwise calling the na via the intercom Button wouldn’t transfer to a cell. MontrealSoft.com http://www.montrealsoft.com

Hi, A customer had a power outage lately and his mics lost all its config. We have plans to switch over to ip within a few months but I needed to get the mics back on its feet. I managed to reprogram everything the way it was, but the forward from set to external numbers. Route programming...

Yes, both were 3.1. The one that came with the unit that refused language configuration at the bottom, and the new one on top, as instructed. MontrealSoft.com http://www.montrealsoft.com

Well Thanks for the explanation and links ! I managed to extract the list of keycodes, since I couldn't see them directly in the interface (somehow I though I already saw some in there a while ago). I put a new card on the top slot, looked at it while it upgraded (via the serial port), and the...

Hi, I don’t need a backup, this is a box I plan to install to replace a flash4. Will look into the link for the key codes, as son key code shows in the configuration. But I don’t have a more recent software. :( Can the upgrade be done from another software of the same version ...

Hi Guys, I have a CP150 3.1 (call it Box A) I need to change the language. I have the cd and utility, but I always get a timeout in the middle of the process. I have a second CP150 3.1 (call it BOX B). If I clone the flash card from BOX A and try the cloned card in BOX A, I loose my 300 seats...

Thanks for your opinion Bvgary, but in this case, it's a tiny installation in the middle of a park by the river, 12'x4', without any kind of insulation. I'm scared just thinking about the heating costs of that building, and I have installations in 6 of them. I found manufacturers specialized in...

Hi guys, I have a customer with small installations across the city. Problem is a few of them aren't heated in winter time, and being in Canada, temperatures can go down to -20, sometimes lower. What would you guys use in these situations ? We have a switch, small router, modem and a small...

Great, thanks, will swap my software card as soon I can. Luc MontrealSoft.com http://www.montrealsoft.com

Ok, bought this CP150 Mini from ebay. Just learned it was for option 11. Question. Is only the software different? If I have a dead CP150, can I simply swap the software over to the CP150 Mini to get to to work on my CICS ? Thanks ! MontrealSoft.com http://www.montrealsoft.com

Thanks for the complete answer ! Now, you say “ Restrict lines (not the vmails DN):” Doing this what way then, via the sets line restrictions ? (Then I copy yo all sets) ? MontrealSoft.com http://www.montrealsoft.com