Hi there,
Can attach to DTE port as per FAQ but although AT command generates an "OK" any other such as AT-X, AT-X2 or AT-X3 generates "ERROR".
I am trying to default the unit.
Any ideas?
Thanks for replies.
MTVilla: Keys just beep
jconrad0305: we use vigor 2800's - but surely as it's a VPN link, that is irrelevant? (vigor say so when asked).
Where do I set manager to 255.255.255.255?
I have noticed that the IP phone has stopped responding to pings from this lan but will respond...
Hi again,
OK we are still stuck.
Have added the route into the IP401 and now the remote site can ping it. Both sites can ping the phone. The phone will not answer calls, it just sits there saying "discovering 192.168.42.1" (the IP401 IP addresss).
Any ideas?
Hi Peter,
OK I added the route and now the remote side can ping the IP401 :-)
It still fails at finding TFTP...
It seemed to work on the local lan without Manager running.
I have the Manager but only on the local lan - do I need to install Manager on a PC on the remote lan too? Will it need to...
MrIPO:
I admit I assumed the IP401 IS the TFTP server?
The IP 401 doesn't seem to have way of entering a gateway address.
Local lan:
192.168.42.0 (subnet 255.255.255.0)
IP401 192.168.42.1
Router/Gateway/VPN 192.168.42.254
Remote LAN:
192.168.0.0 (subnet 255.255.255.0)
Router/Gateway/VPN...
Hi,
OK, got me a couple of 4621SW phones, they work great on local lan :-)
However, when I sent them to our remote lan site which is linked to our by VPN I get "failed TFTP server". I can ping all IP addresses on remote site from local site and remote site can ping all on my site (except the IP...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.