Recent content by Modi73

Thank you for the tip trvlr1, you're right i have to set the options that come after (sorry, i'm an I.T Manager and I'm new to this PBX Management), I found my way and i was able to solve the problem, all calls are coming through to the CDR now. phonz1, as you requested here's the route 99...

Hi All, I discoverd yesterday that local calls are not being sent over the CDR port. So, i went to LD 21 and printed all the RDB settings for all routes and i found out that the CDR is set to no on the PRI route (which is used for local outgoing calls). So i went to LD 16 and i set the CDR to...

Thanks Ghtrout, i got all the information i need :)

Hi All, I am changing my provider for the PRI and DID numbers, and they asked me about the current "TRUNK SELECT SEQUENCE" configuration on my PBX, also the incoming digit conversion? I have "Meridian 1 Option 61C, release: 3521 / 04.50W". I would really appreciated if somebody can send me...

Hey Ghtrout, Thank you for your prompt reply. Actually I wish I had the Meridian Mail, but I have the HMS400. Anyway, you have given me the hint that this needs to be changed in HMS400, and i found the executable which allows me to change the configuration of the auto attendant "Autoattn.exe"...

Hi all, I'm an I.T Manager and i work at a hotel and i have a basic experience with PBXs, I have Meridian 1 Option 61C. I have an ACDN cofigured with a menu option prompt where when you press 0 it routes to the operator, and when pressing 1 it forwards to an outside number (Central Reservation...