Recent content by MNboy

OCTEL MANUALS http://support.avaya.com/japple/css/japple?PAGE=ProductIndex#o

If the users do not have ext's programmed on the system, then create "phantom exts" and set them to call forward always to the speeddial number. Make a mailbox too. Or if the users do have a physical set onsite, when they are away they can call forward always the set to the speeddial number if...

If the SX200 is feature level 2 (lw 18 or 19 - feature level 2) or higher, in form 32 you will see the option to "display all" cde forms. To captured this information with Procomm, under your setup files for data, set your capture file options to * write filtered text with no emulation escapes...

default for login: root passcode: (just hit enter) default for admin is 0 Time change for daylight savings is automatic with software 6.0C or above.

I think for a new user the easiest way is to just do the reboot without the shutdown. As most of you know theres a procedure to the shutdown and sometimes, mwl hangs, or ports hang and unless you know how to clear the port in qnx, a new user is left with no choice but rebooting. Also some people...

I don't think ianuk1974's suggestion will work for dts trunks. Form 14 routing will be ignored and ring to the set. I think if you enable option 815 in the COS of the trunks to allow forwarding, then the user can choose to answer the phone if at the phone or call forward always if away to a...

Sounds like you need to reboot the phone system.

Site for manuals, don't need MOL account. freeeeeeeee. http://www.wedophones.com/MitelManualsLead.htm When you download the 3100 tech book, the info for resetting your database to default is inside. You'll need to procure a paperclip.