Which SD WAN solution are they using and what method is being used for traffic balancing? We recently deployed Citrix appliances to all our outlying health clinics and added DIA circuits to each in addition to our existing Cox MPLS Metro Ethernet circuits. We are still experiencing some errors...
Same hardware and have a station port connected to a fax machine as port 1, and 4 CO loop-start line as the last 4 ports on the MM711. I've had problems with faxes across the IP link to our 8800 so I'd like to route all calls from the fax to go out the analog trunk group. Is there a shortcut for...
Good question Sivonet, too bad someone who might have the knowledge hasn't bothered answering it. I came across your post as I am looking for reasons to get (or not get) some 9641G's for executives. Would certainly love to hear of general user acceptance of these and/or other fairly recent Avaya...
Thanks,
Are you saying that a TDA or TDE system will allow me access through DISA to do the following:
1. Dial an internal extension set to auto answer--this is connected through the headset jack to the whole house paging system.
2. Call into the system and access another CO line--this is to be...
So what does it take with a Panasonic system to provide international dialtone to an outside salesperson?
How about being able to call from the outside and access an internal extension set to auto-answer that's hooked up to an external overhead paging system? It works fine from internal...
Regarding my original question, would the newer KX-TA824 system allow for an inbound caller to access another CO line--using it's built in DISA or in conjunction with the TVA50's auto attendant? While it is creative solution, I'd prefer to avoid the loop around method suggested elsewhere.
If the...
CWC3,
And someone would know to look under 'D' for DSS to fix tbcinc's problem because?? Why not look under 'F' for flashing or 'L' for lights?
I know from my time browsing this forum that you know your stuff--but I've read enough of Panasonic's manuals to know that they are not as helpful as...
I have a client with a KXTA-624 v5 hooked to a TVA50. I have also setup a Grandstream VoIP gateway hooked up to CO4, which he uses for international calling. This works fine but now he wants it configured so that he can call into the system from his cell, choose a hidden option from the TVA'a AA...
When I define the Directory button on our 8411D phones, I find that the Prev and Next pre-defined buttons are not working to move forward/backward in the list. Can anybody confirm this and/or let me know of a fix. We're running V9.5 on the Si platform. Thanks!
I'm working with a similar implementation using a PRI connecting between a G3V9.5 Avaya and an Asterisk server.
I was able to set it up so that I can dial the 4 digit numbers of extensions on the Avaya (5900-5999) from the Asterisk, and/or dial the 4 digit number of the Astersik extensions...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.