Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by mknoxwfc
-
Swap Two 7960 (+7914) Telephone Hardware
Unplug both phones, copy both of the mac address somewhere. Goto config page of one of the phones change the mac address to something like 000000000000 - update Goto to the config page of the other phone and change the mac address to the one you want(other phone) - update Go back to the...- mknoxwfc
- Post #2
- Forum: Cisco: Call Manager
-
Need to allow DMZ access to INSIDE from another firewall
Hi, we need to setup a control point on our DMZ to allow a third-party support group to manage a few of our servers from the DMZ. They are coming in from their own private link and will need to have full access to the secific systems. I've tried several different setups and am failing. Here is...- mknoxwfc
- Thread
- Replies: 2
- Forum: Security, hacker detection & forensics
-
PDM and Access List problem
Got it working now, thanks for the help.- mknoxwfc
- Post #5
- Forum: Security, hacker detection & forensics
-
PDM and Access List problem
Thanks for the info, but everytime I try to apply above settings in any way those parts stop working. Any clues as to whats going on? Thanks, Michael- mknoxwfc
- Post #3
- Forum: Security, hacker detection & forensics
-
PDM and Access List problem
Hi, I'm getting the following error when trying to use the PDM "PDM does not support multiple uses of a given Access Control List" Here is the current config PIX Version 6.2(1) nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 dmz security50...- mknoxwfc
- Thread
- Replies: 4
- Forum: Security, hacker detection & forensics
-
Access-List PDM Error
I'm getting an error from the PDM upon load. "PDM does not support multiple uses of a given access control list" This is the ACL config access-list 101 permit ip host 12.17.125.12 host 194.117.106.129 (for a VPN to VPN Connection) access-list 101 permit ip any 10.201.1.0...- mknoxwfc
- Thread
- Replies: 1
- Forum: Security, hacker detection & forensics
-
PIX 515 - VPN - Internet access
Worked like a charm. Thanks- mknoxwfc
- Post #3
- Forum: Security, hacker detection & forensics
-
Member experience with CM
The Meet-Me conference is a very nice feature and allows for quick or planned conference bridges for internal and external users. Gets us away from trying to setup the multiple three-way conference calls between companies. Meet-Me conference is included with the CCM but does not have any...- mknoxwfc
- Post #6
- Forum: Cisco: Call Manager
-
PIX 515 - VPN - Internet access
Can anyone tell me how I can set up a VPN client(3.5) connected into a PIX 515 (6.1.1) to access the Intenet while connected to the PIX VPN? We are using an Internet dialup and connecting to the VPN but lose the Internet connectivity while the VPN is active. I have heard this is a security...- mknoxwfc
- Thread
- Replies: 2
- Forum: Security, hacker detection & forensics
-
Member experience with CM
We have installed the Cisco Call Manager 3.1 with Unity 2.4.6 running about 165 phones. We also have the ICD running for the Auto Attendant and a mini Call Center. Once it was up and running it works very well. We moved off of a Lucent/Avaya Switch. How difficult was initial install? Our issue...- mknoxwfc
- Post #2
- Forum: Cisco: Call Manager
